Description
The 5.7×28 is a notoriously fussy little cartridge to load, and that's exactly where this RCBS Small Base Die Set earns its keep. This Group D two-die set is purpose-built for the FN 5.7×28, shaping brass tighter than a standard full-length die so your reloads drop into battery without a fight. If you've got a PS90, Five-seveN, or any other tight-chambered 5.7, this is the kind of setup that takes the guesswork out of reliable feeding.
The small base sizer squeezes the shoulder and body down a few thousandths below SAAMI minimum spec, which is the whole point of a small base die. That extra bit of resizing is what keeps a round chambering and extracting smoothly in semi-automatic, pump, and lever actions where tighter tolerances can hang up brass that was sized with standard dies. The sizer also decaps as it works, and the built-in expander opens the case mouth to take the next bullet. On the seating side, the Regular Seater Die comes with a seater plug and a built-in roll crimper, so you can lock the bullet in place at the same time you seat it. If you'd rather seat without crimping, you just back the die off until the crimp ring clears the case mouth.
Loading 5.7×28 With the RCBS Small Base Die Set
Anyone who has loaded this round will tell you lubrication is everything. The 5.7 case has a long unsupported section and a factory coating, so plenty of good case lube and a well-prepped sizer keep brass moving smoothly and your dies happy. Experienced loaders lean toward lighter sizing lubes and a clean, polished die body for best results. Trimming matters too, since the 5.7 neck is narrow and works best with a proper chamfer before seating.
What Comes in the RCBS Group D Die Set
The dies thread into any standard 7/8-14 press, so they'll work in whatever single-stage or progressive press you're already running. Just note the shellholder is not included, so you'll want to grab the correct one separately before your first session.
Key Specifications
- Brand: RCBS
- Caliber: 5.7×28 (FN)
- Die Set Group: Group D
- Die Type: Small Base Sizer, Bullet Seater
- Number of Dies: 2
- Thread Size: 7/8-14
- Shellholder Included: No
- Crimp: Built-in roll crimper in seater die
- Country of Origin: USA
- Manufacturer Part Number: 11703
- UPC: 076683117038
- Shipping Weight: 1.1 lbs
What’s Included
- Small Base Sizer Die with Expander-Decapping Unit
- Regular Seater Die with Seater Plug and built-in roll crimper
- RCBS die storage box
Frequently Asked Questions
What makes the RCBS small base die set different from a standard full-length set?
The small base sizer reduces the shoulder and body of the case a few thousandths below SAAMI minimum dimensions, tighter than a standard full-length die. That extra sizing is designed for semi-automatic, pump, and lever-action rifles with tighter chambers, where it helps the round chamber and extract reliably. For a round like the 5.7×28 running in tight actions, that reliability is the main reason to reach for these over standard dies.
Does the RCBS Group D 5.7×28 die set come with a shellholder?
No, the shellholder is not included with this set. The 5.7×28 uses a specific shellholder, so you'll want to pick up the correct one separately before loading. It's an easy add and worth getting sorted before your first session.
Do I need special case lube when sizing 5.7×28 with these dies?
Yes, good case lube is essential with the 5.7×28. The case has a long unsupported section and a factory coating, so plenty of quality lube keeps brass from sticking in the sizer. Many loaders favor lighter sizing lubes and recommend wiping the cases clean afterward so leftover lube doesn't interfere with how the round grips the chamber on firing.
Can I seat bullets without crimping using the RCBS seater die?
You can. The Regular Seater Die has a built-in roll crimper, but if you want to seat without crimping, just back the die off until the crimp ring no longer engages the case mouth. That gives you the flexibility to crimp or not depending on your load and firearm.





Reviews
There are no reviews yet.