0
0

RCBS Legacy Sharps 3-Die Roll Crimp Set .50-70 Gov’t

UPC: 076683368041

$81.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Loading for the .50-70 Government means working with an old-school straight-wall rifle case, and this RCBS Legacy 3-Die Roll Crimp Set is cut specifically for that job. It gives you three dedicated steel dies that handle every step of case prep and loading, so you can keep feeding your original or reproduction black powder cartridge rifle without hunting down factory ammo that is tough to find. The .50-70 dates back to 1866 as the first U.S. military centerfire cartridge, and plenty of folks still run it in Springfield trapdoors, Remington rolling blocks, and Sharps rifles.

How the RCBS .50-70 Legacy Die Set Works

The set breaks down into three straightforward operations. The steel sizer die resizes the fired case back to spec and de-primes it in the same stroke. The expander die opens the case mouth to the correct inside diameter and adds a slight flare, which makes seating lead bullets a lot easier and helps prevent shaving. The seater die then drops the bullet to your chosen depth and rolls the case mouth into the bullet's cannelure. That roll crimp matters on a cartridge like this, since it locks the bullet in place so it won't walk under recoil or during feeding.

Lubing and Setup for the Sharps Legacy Set

This is a standard steel die set, not carbide, so cases need to be lubricated before sizing. A light, even coat of case lube keeps everything moving smoothly and prevents a stuck case. The dies use the common 7/8-14 thread, so they'll thread right into any standard single-stage or turret press. Keep in mind the shell holder is sold separately, and the .50-70 uses a large rim that calls for the correct holder before you get rolling.

Built for the Shooter Who Loads Their Own

RCBS has been making reloading gear in the USA since 1943, and the Legacy line is aimed squarely at the black powder cartridge and cowboy action crowd who need tooling for older calibers. Most .50-70 handloaders size cast bullets around .512 to .515 depending on their bore, and these dies give you the control to tune seating depth and crimp to match your load. If you shoot the .50-70 and want to keep that old rifle fed, this is the tooling that gets it done.

Key Specifications

  • Manufacturer: RCBS
  • Caliber: .50-70 Gov't
  • Series: Legacy
  • Die Set Type: 3-Die Roll Crimp Set (Sharps Straight)
  • Die Material: Steel (requires case lubrication)
  • Thread Size: 7/8-14
  • Cartridge Type: Straight-wall rifle
  • Country of Origin: Made in USA
  • Shell Holder: Sold separately
  • Manufacturer Part Number: 36804
  • UPC: 076683368041
  • Shipping Weight: 1.4125 lbs

What’s Included

  • Steel sizer die with decapping unit
  • Expander die
  • Seater die with roll crimp
  • Storage box

Frequently Asked Questions

Does the RCBS .50-70 Legacy die set include a shell holder?

No, the shell holder is not included with this set and is sold separately. The .50-70 Government uses a large rimmed case, so you'll want to match it with the correct shell holder for your press before loading. Most reloading charts list this cartridge under a shell holder that also fits similar large-rim calibers.

Do I need to lubricate cases with this die set?

Yes. This is a standard steel die set rather than carbide, so cases must be lubricated before sizing. A thin, even coat of case lube keeps the operation smooth and helps avoid a stuck case in the sizer die.

What does the roll crimp do on the .50-70 seater die?

The seater die rolls the case mouth into the bullet's cannelure as it seats the bullet. This locks the bullet in place so it won't shift under recoil or during feeding, which is especially useful on a heavy straight-wall cartridge like the .50-70 Government.

Will these dies fit my reloading press?

Yes, the set uses the industry-standard 7/8-14 thread, so it threads into virtually any standard single-stage or turret press. The set is built for original and reproduction black powder cartridge rifles chambered in .50-70, including trapdoor Springfields, rolling blocks, and Sharps rifles.

Additional information

UPC

076683368041

Manufacturer

Manufacturer Part Number

36804

Shipping Weight

1.4125

Reviews

There are no reviews yet.

Be the first to review “RCBS Legacy Sharps 3-Die Roll Crimp Set .50-70 Gov’t”