Description
Finding quality reloading gear for a classic British double rifle cartridge like the .450-400 Express 3 inch is no small task, which is why RCBS built the Safari Series. This two-die set is purpose made for a cartridge that most factories skip over, giving handloaders a reliable way to feed vintage and modern dangerous game rifles chambered in this round. The set covers everything needed to turn fired brass into loaded ammo, with a Full-Length Sizer Die that carries an expander-decapping unit and a Seater Die fitted with a bullet seater plug.
What the Safari .450-400 Express Dies Bring to the Bench
Every RCBS Safari die is machined from case hardened steel, which is the kind of material that stands up to the abrasive wear that case sizing throws at it season after season. The full-length sizer is vented to prevent case damage from trapped air and excess lubricant, and headspace is held to minimum tolerances so you are not stretching or shortening your brass during the sizing stroke. For a cartridge where quality brass is hard to come by and worth protecting, that attention to case life matters.
Seating and Crimping Your .450-400 Nitro Express Loads
The seater die includes a built-in roll crimp that is appropriate for this big-bore cartridge, which helps lock heavy bullets in place against recoil. If you prefer to seat without crimping, you simply back the die off until the crimp ring clears the case mouth. Large hex lock rings with hex head set screws make adjustments quick and repeatable once you dial in your load.
A Note on the .450-400 3 Inch Cartridge
The .450/400 Nitro Express 3 inch, sometimes listed as the .400 Jeffery, earned its reputation as a dependable dangerous game round that experienced hunters trusted on heavy African game. Keeping one of these rifles fed means handloading, and these dies give you the tools to do it right. Remember to keep your cases properly lubricated before running them through the sizer.
Key Specifications
- Manufacturer: RCBS
- Series: Safari Dies
- Manufacturer Part Number: 24401
- UPC: 076683244017
- Cartridge: .450-400 Express 3 Inch (.400 Jeffery)
- Die Type: Full-Length 2-Die Set
- Case Type: Bottleneck
- Material: Case Hardened Steel
- Thread: 7/8-14 Standard
- Crimp: Built-in Roll Crimp
- Recommended Shell Holder: RCBS #31
- Shipping Weight: 1.4 lbs
What’s Included
- Full-Length Sizer Die with Expander-Decapping Unit
- Seater Die with Bullet Seater Plug
Frequently Asked Questions
What cartridge does this RCBS Safari die set reload?
This set is made for the .450-400 Express 3 inch, which is also known as the .400 Jeffery Nitro Express. It is a classic British dangerous game cartridge, and these dies let you handload brass for rifles chambered in that round.
How many dies come in the Safari .450-400 Express set?
This is a two-die set. You get a Full-Length Sizer Die with an expander-decapping unit and a Seater Die with a bullet seater plug, which covers the full sizing, decapping, and seating process for bottleneck cases.
Does the seater die crimp the case?
Yes, the RCBS Safari seater die has a built-in roll crimp appropriate for this cartridge. If you want to seat bullets without crimping, you can back the die off until the crimp ring no longer engages the case mouth.
What thread and shell holder does this die set use?
These Safari dies use the standard 7/8-14 thread, so they fit standard reloading presses. For the .450-400 Express 3 inch, RCBS recommends using the #31 shell holder, which is sold separately.




Reviews
There are no reviews yet.