Description
The .404 Jeffery has earned its place as one of the classic dangerous-game rounds, and loading for it takes dies built for the job. The RCBS Safari Full Length Die Set covers exactly that. This two-die set is made for bottleneck cases and pairs a Full-Length Sizer Die with Expander-Decapping Unit alongside a Seater Die with Bullet Seater Plug. It carries standard 7/8"-14 threads, so it drops right into the common single-stage presses most big-bore reloaders already run.
What the Safari .404 Jeffery Dies Handle
The sizer die does the heavy lifting. It resizes the full case body and shoulder, de-primes the spent case, and expands the neck to accept the bullet all in one stroke. Vents are built in to let trapped air and excess lube escape, which matters a lot on a case this large. The .404 is a long, wide case with a sloping shoulder, and it will stick in the die if you skip lubrication, so a good sizing wax is your friend here. The seater die handles bullet seating depth and includes a built-in crimp to lock the bullet in place, which is worth its weight when you are loading rounds meant to stand up to heavy recoil.
Why Reloaders Reach for the .404 Jeffery Safari Set
Factory .404 Jeffery ammo is not something you stumble across on a shelf, and that is a big part of why handloading this cartridge is so popular. These dies give you control over bullet selection and seating depth, letting you tune loads around 400-grain projectiles from makers like Barnes for buffalo and other large game. The rimless, beltless case is also friendly to repeat reloading since you avoid the case head separation issues belted magnums can bring.
Setting Up the Safari Die Set
These dies thread into any standard press, but you will want the correct shell holder to go with them. RCBS pairs the .404 Jeffery with their #41 shell holder, which is sold separately. Take your time dialing in the sizer against a once-fired case from your own rifle so the shoulder lands where your chamber wants it. Get that right and this set will turn out consistent, dependable ammunition load after load.
Key Specifications
- Manufacturer: RCBS
- Series: Safari
- Cartridge: .404 Jeffery
- Die Type: Full-Length Sizer, Seater
- Number of Dies: 2
- Case Type: Bottleneck
- Thread Size: 7/8"-14
- Shell Holder: Not included (RCBS #41)
- Country of Origin: USA
- Manufacturer Part Number: 24301
- UPC: 076683243010
- Shipping Weight: 1.4 lbs
What’s Included
- Full-Length Sizer Die with Expander-Decapping Unit
- Seater Die with Bullet Seater Plug
Frequently Asked Questions
What does the RCBS Safari .404 Jeffery die set include?
It is a two-die set built for bottleneck cases. You get a Full-Length Sizer Die with an Expander-Decapping Unit and a Seater Die with a Bullet Seater Plug. The sizer resizes the case, removes the spent primer, and expands the neck, while the seater sets bullet depth and crimps.
Does this die set come with a shell holder?
No, a shell holder is not included. For the .404 Jeffery you will want the RCBS #41 shell holder, which is sold separately. It is worth grabbing one at the same time so you are ready to load right out of the gate.
Will these dies fit my press?
The Safari .404 Jeffery dies use standard 7/8"-14 threads, so they fit the common single-stage presses most reloaders already own. Just be sure your press and shell holder are set up for a case this large.
Do I need to lubricate .404 Jeffery cases before sizing?
Yes, case lube is a must. The .404 Jeffery is a large case and it can stick in the die if you size it dry. A quality sizing wax applied before running cases through the full-length sizer keeps things smooth and protects your brass.




Reviews
There are no reviews yet.