Description
If you run an RCBS Rotary Case Trimmer, the Collet #1 is the one that handles the bulk of your brass. It works on the same principle as a draw collet on a lathe, closing down tight on the case head to hold everything concentric to the cutter. That square, centered grip is what gives you consistent trim-to-length results across a full batch, which matters when you're chasing tight neck tension and uniform bullet seating down the line.
What the Collet #1 Grips Onto
This is the broad-range collet, and it covers a serious lineup of cartridges. It locks onto the small rimless head around the .223 Remington, the standard .473 head shared by .308 Winchester, .30-06 Springfield, .243 Winchester, .270 Winchester, 6.5 Creedmoor and 7mm-08, plus a group of magnums. Because the collet closes on the case rim rather than the body, cartridges that look nothing alike on the shelf often share the same collet. A stubby .223 and a long .30-06 both seat right into it. When you're not sure, measure your rim with calipers and match it to a listed cartridge with the same rim diameter.
Fitting the Collet #1 to Your Trimmer
This collet is built for the RCBS Rotary Case Trimmer and the Rotary Case Trimmer-2. Dropping a case in is quick: back the handle off to loosen the collet, slide the case head in, then snug it back down to clamp it in place. The quick-release setup means swapping cases goes fast when you've got a pile of brass to get through.
Machined from steel for a long service life, the #1 is the collet most reloaders reach for first because it spans so many of the common rifle rounds. If you shoot a cartridge outside its range, RCBS offers collets #2 through #4 to round out the rest of the chart.
Key Specifications
- Manufacturer: RCBS
- Collet Number: #1
- Manufacturer Part Number: 9371
- UPC: 076683093714
- Compatibility: RCBS Rotary Case Trimmer and Rotary Case Trimmer-2
- Rim Diameter Steps: .379, .473, .532 inch
- Material: Steel
- Color: Silver
- Quantity: 1 collet
- Country of Origin: USA
- Shipping Weight: 0.0813 lb
What’s Included
- RCBS Rotary Case Trimmer Collet #1 (1 collet)
Frequently Asked Questions
What cartridges does the RCBS Collet #1 cover?
The #1 is the broad-range collet, covering cases around the .223 Remington small rimless head, the standard .473 head used by .308 Winchester, .30-06 Springfield, .243 Winchester, .270 Winchester, 6.5 Creedmoor and 7mm-08, plus several magnums. Since the collet grips the case rim, cartridges that look totally different can still share it. If your round isn't on the chart, measure your rim diameter and match it to a listed cartridge with the same rim.
Which trimmers does the Collet #1 fit?
It's made for the RCBS Rotary Case Trimmer and the Rotary Case Trimmer-2. It's not designed for the Trim Pro-style systems, so make sure your trimmer is one of those rotary models before ordering.
How does the RCBS Collet #1 hold the case?
It works like a draw collet on a lathe. You loosen the handle to open the collet, drop the case head in, then tighten it down to clamp the brass concentric to the cutter. That centered hold is what keeps your trim lengths consistent from case to case.
Do I get a pilot with the Collet #1?
No, this listing is for the collet only. The case trimmer pilot that matches your caliber is sold separately, so you'll want the correct pilot to guide the case mouth into the cutter for a straight trim.




Reviews
There are no reviews yet.