$63.99
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The #32 shell plate is the piece that lets you run 7.62x39mm and its close relatives through your RCBS Pro Chucker progressive press. Each plate is precision-machined from durable steel to grip the case head and keep every case squared up with your dies as the head rotates through all seven stations. That alignment is what keeps your sizing, priming, and seating consistent round after round, which matters a lot more once you're cranking out volume instead of loading one case at a time.
The #32 covers a handy group of cartridges that share a case head, including 7.62x39mm, .22 PPC, 6mm PPC, 6mm ARC, and 6.5 Grendel. The number system here is simple: your shell plate number matches the RCBS shell holder number for your caliber, so if a #32 holder works for your round, the #32 plate is what you want. Keep in mind RCBS numbers don't line up with other brands, so go by the RCBS chart rather than what you might use on a competitor's press.
One of the nicer things about the Pro Chucker setup is how quick the plate change is once you get the hang of it. Pull the old plate, drop in the #32, and you're ready to load a different family of brass without wrestling the whole press. This plate is built for the Pro Chucker 7 out of the box, and it'll run on a Pro Chucker 5 too if you've got the Pro Chucker 5-to-7 conversion kit installed.
RCBS has been building reloading gear in the USA since 1943, and these plates carry the same reputation as the rest of their lineup. It's a hardened steel part designed to take heavy use and hold its tolerances for the long haul, backed by RCBS's limited lifetime warranty.
The #32 plate is set up for cartridges that share that case head, including 7.62x39mm, .22 PPC, 6mm PPC, 6mm ARC, and 6.5 Grendel. If your caliber calls for a #32 RCBS shell holder, this is the matching plate. Always confirm against the RCBS shell plate chart before ordering.
It's built for the Pro Chucker 7, but it will run on a Pro Chucker 5 if you install the Pro Chucker 5-to-7 conversion kit, which is sold separately. Without the conversion kit, you'll want the standard 5-station version of the plate instead.
RCBS keeps it simple by matching the shell plate number to the shell holder number for your cartridge. So if you'd use a #32 shell holder for a round, you'd use the #32 shell plate. Just remember RCBS numbers don't cross over to other brands, so stick with the RCBS reference.
Yes, it's machined from durable hardened steel to hold tight tolerances and stand up to heavy, repeated use. It's made in the USA and covered by RCBS's limited lifetime warranty, so it's built to last through years of loading.
| UPC | 076683889676 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 88967 |
| Shipping Weight | 0.485 |
You must be logged in to post a review.
Reviews
There are no reviews yet.