0
0

RCBS Precision Mic 6.5mm PRC Headspace & Seating Depth Gauge

UPC: 604544672688

$86.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The RCBS Precision Mic for 6.5mm PRC is one of those tools that quietly earns a permanent spot on the reloading bench. It's a caliber-specific gauge built to measure chamber headspace and bullet seating depth down to .001 inch, which takes a lot of the guesswork out of two of the most important variables in building consistent ammo. Instead of chasing die settings by feel, you get real numbers you can repeat load after load.

How the 6.5mm PRC Precision Mic Reads Your Brass

The tool measures from the datum point on the case shoulder to the base of the case, giving you readings that line up with SAAMI tolerance practices. To check headspace, you drop a piece of fired brass into the body, thread the headspace nut down until it contacts the shoulder, and read the micrometer scale. A zero reading represents SAAMI minimum and a plus ten represents maximum, so you can see exactly where your fired brass and your resized brass fall. That makes setting a full-length sizing die a precise job rather than a trial-and-error one, and bumping the shoulder back a consistent two or three thousandths becomes easy to confirm.

Why 6.5 PRC Reloaders Reach for This Gauge

The 6.5 PRC is a cartridge built around precision, so it makes sense to prep the brass with the same mindset. The Precision Mic also includes a freebore tool and land nut that let you find where your bullet contacts the lands, giving you a solid starting point for seating depth testing. Dialing in that distance and then working up and down in small increments is how a lot of folks chase the tightest group with a particular bullet. Keeping your sized cases consistent also means you're not overworking the brass, which helps it last longer through more firings.

RCBS has been making reloading gear in Oroville, California for decades, and the Precision Mic reflects that long-running reputation for dependable, no-nonsense tools. For anyone loading 6.5 PRC who cares about repeatable results, it's a straightforward way to put hard measurements behind your bench work.

Key Specifications

  • Manufacturer: RCBS
  • Caliber: 6.5mm PRC
  • Manufacturer Part Number: 88336
  • UPC: 604544672688
  • Tool Type: Headspace and bullet seating depth gauge
  • Measurement Resolution: 0.001 inch
  • Measurement Reference: Datum point on case shoulder to case base
  • Reading Standard: SAAMI tolerance
  • Caliber Specific: Yes
  • Country of Origin: Made in USA
  • Shipping Weight: 1.86 lbs

What’s Included

  • RCBS Precision Mic body for 6.5mm PRC
  • Headspace gauge nut
  • Freebore tool and land nut for seating depth
  • Instructions

Frequently Asked Questions

What does the RCBS Precision Mic 6.5mm PRC actually measure?

It measures your chamber headspace and bullet seating depth to .001 inch by reading from the datum point on the case shoulder to the base of the case. The scale is set up so a zero reading is SAAMI minimum and plus ten is SAAMI maximum. That lets you see where both your fired brass and resized brass fall relative to spec.

Can I use this tool to set my full-length sizing die?

Yes, that's one of its main jobs. You measure your fired brass to understand your chamber, then adjust your sizing die and re-check until the shoulder is bumped back a consistent amount, usually a couple thousandths. Having a repeatable number takes the trial-and-error out of die setup and helps keep your brass lasting longer.

Does the Precision Mic work for finding bullet seating depth?

It does. The freebore tool and land nut let you determine where your bullet touches the lands, which gives you a starting point for seating depth. From there you can work up and down in small increments to find the sweet spot for your specific bullet and rifle.

Is the 6.5mm PRC Precision Mic caliber specific?

Yes. This unit is machined specifically for 6.5mm PRC and will not interchange with other cartridges. If you load multiple calibers, you'll want the matching Precision Mic for each one.

Additional information

UPC

604544672688

Manufacturer

Manufacturer Part Number

88336

Shipping Weight

1.86

Reviews

There are no reviews yet.

Be the first to review “RCBS Precision Mic 6.5mm PRC Headspace & Seating Depth Gauge”