Description
The RCBS Precision Mic for .270 Winchester takes the guesswork out of two of the fussiest parts of rifle reloading: shoulder bump and seating depth. With a few twists it reads chamber headspace and bullet seating depth to within .001 inch, measuring from the datum point on the case shoulder to the base and giving you readings referenced to the SAAMI minimum. If you've been running factory die settings and hoping for the best, this is the tool that lets you see what your sizing die is doing to your brass.
How the .270 Win Precision Mic Works
The tool is caliber specific and built around a body with a headspace nut and a land nut. You fire-form a case in your own rifle, drop it into the body, and thread the headspace nut down until it contacts the shoulder. The marks tell you where your fired brass sits relative to the SAAMI minimum, usually a few thousandths over. From there you set your full-length die to bump the shoulder back just enough to chamber smoothly, typically .001 to .002 inches for a bolt gun, instead of over-sizing and working the brass to death.
Why Reloaders Keep a Precision Mic on the Bench
The real payoff is brass life and consistency. Properly sized cases stretch less, which means fewer case-head separations and more firings out of every piece. The kit also includes a bullet seating depth tool for getting your seater die dialed in on initial setup, so you can start chasing that sweet spot off the lands. It's a favorite among handloaders who want repeatable measurements without buying a full comparator setup.
Getting the Most from the .270 Winchester Precision Mic
Keep in mind every rifle chamber is a little different, so your reference cases need to come from the gun you're loading for. Most folks measure several fired cases and average the readings before setting their die. Once it's set, a quick check of a sized case confirms you're getting the bump you want. For anyone loading .270 Win for hunting or range work, it turns headspace from a mystery into a number you can actually read.
Key Specifications
- Caliber: .270 Winchester
- Measurement Resolution: 0.001 inch
- Measures: Chamber headspace and bullet seating depth
- Reference Standard: SAAMI minimum (datum point on case shoulder to base)
- Tool Type: Caliber-specific cartridge headspace and seating micrometer
- Manufacturer: RCBS
- Manufacturer Part Number: 88316
- UPC: 076683883162
- Shipping Weight: 0.72 lbs
What’s Included
- RCBS Precision Mic body with headspace nut and land nut (.270 Winchester)
- Bullet seating depth tool for seater die setup
- Instructions
Frequently Asked Questions
What does the RCBS Precision Mic .270 Win actually measure?
It measures your chamber headspace and bullet seating depth down to .001 inch, reading from the datum point on the case shoulder to the base. The numbers are referenced to the SAAMI minimum dimension for .270 Winchester. That lets you see how much your fired brass has grown and how far your sizing die is setting the shoulder back.
How do I use the Precision Mic to set up my sizing die?
Fire-form a case in your rifle, drop it in the body, and thread the headspace nut down to the shoulder to read the headspace. Then size a case and check it the same way to see how far the die moved the shoulder. Most bolt-gun loaders aim for about .001 to .002 inches of shoulder bump, which chambers reliably without over-working the brass.
Is this Precision Mic only for .270 Winchester?
Yes, the Precision Mic is a caliber-specific tool, and this model (88316) is cut for .270 Win. If you load other cartridges, you'll want the matching Precision Mic for each one. Your reference cases also need to be fired from the specific rifle you're loading for, since every chamber is slightly different.
Does the Precision Mic help with brass life?
It does. By showing you exactly how much the shoulder is moving, you can size just enough to chamber reliably instead of over-sizing. Cases that are bumped minimally stretch less, which reduces the risk of case-head separation and gives you more firings per piece of brass.





Reviews
There are no reviews yet.