0
0

RCBS Precision Mic 25-06 Remington Headspace & Seating Depth Gauge

UPC: 076683883070

$86.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Dialing in headspace used to feel like guesswork. The RCBS Precision Mic takes that out of the equation for the .25-06 Remington handloader. A few twists and you'll know your chamber headspace and bullet seating depth to within 0.001 inch, measured right off the datum point on the case shoulder. It's caliber-specific, meaning everything is machined for the .25-06 so your readings line up with real SAAMI reference dimensions instead of rough estimates.

How the Precision Mic Reads Your Chamber

The body of the tool looks a bit like a short, capped section of threaded pipe. You drop a fired case in primer-end first, then thread the headspace nut down until it stops against the shoulder. The body carries marks running lengthwise, and the nut is marked around its circumference in thousandths, so you simply read where the two line up. Measuring a fired case shows where your chamber sits, then you size a case and check it the same way to see exactly how far you're bumping the shoulder back. Set your die so you're moving brass the minimum amount and you stop over-working it, which is where that extended case life comes from.

Why .25-06 Reloaders Reach for This Mic

The quarter-bore built on the '06 case is a flat-shooting favorite, and consistent headspace is a big part of keeping it accurate and keeping brass in rotation. This tool shines as a shoulder-bump gauge for setting your full-length sizing die, and it also helps you compare seating depth when you're chasing the lands. Handloaders running bolt guns and autoloaders alike use it to confirm cases are sized to spec before they ever hit the press.

Getting the Most Out of Your RCBS Precision Mic

Like any micrometer, a light, repeatable touch matters. Thread the nut down to a consistent feel each time and your readings stay dead repeatable from case to case. Many experienced loaders verify the tool's zero against a known reference when they first get it, then load with full confidence. Treat it as the dedicated .25-06 reference it was built to be and it earns its spot on the bench.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number: 88307
  • UPC: 076683883070
  • Caliber: .25-06 Remington
  • Tool Type: Precision Mic (Headspace & Seating Depth Gauge)
  • Measurement Resolution: 0.001 inch
  • Reference Standard: SAAMI tolerance readings
  • Measures From: Case shoulder datum point to base
  • Color: Black
  • Country of Origin: USA
  • Shipping Weight: 0.72 lbs

What’s Included

  • RCBS Precision Mic body for .25-06 Remington
  • Headspace gauge/nut
  • Land nut (seating depth reference)
  • Freebore tool
  • Instructions

Frequently Asked Questions

What does the RCBS Precision Mic for .25-06 actually measure?

It measures your chamber headspace and bullet seating depth down to 0.001 inch, reading from the datum point on the case shoulder to the base. You drop a case into the body and thread the nut down until it contacts the shoulder, then read the measurement off the marks. This lets you set your sizing die to bump the shoulder back just the right amount.

Is this Precision Mic specific to .25-06 Remington?

Yes. This model (88307) is machined specifically for the .25-06 Remington cartridge, so the body and nuts reference the correct dimensions for that round. If you load other calibers, you'd want the matching Precision Mic for each.

How does the Precision Mic help extend the life of my brass?

By showing you exactly how far your sizing die is pushing the shoulder back, you can set the die to move brass the minimum amount needed to chamber reliably. Over-sizing works the brass harder and shortens its life, so sizing to spec means more firings per case. It's a core part of a careful, consistent reloading routine.

Does using the Precision Mic take any practice?

A little. Like any micrometer-style tool, you want a light and consistent touch when you thread the nut down so your readings repeat case to case. Once you get the feel dialed in, measurements stay very repeatable, and many loaders verify the tool's zero against a known reference when they first set it up.

Additional information

UPC

076683883070

Manufacturer

Manufacturer Part Number

88307

Shipping Weight

0.7188

Reviews

There are no reviews yet.

Be the first to review “RCBS Precision Mic 25-06 Remington Headspace & Seating Depth Gauge”