Description
The RCBS MatchMaster Duo Set in 6.5 PRC takes two of the most useful dies in RCBS's lineup and bundles them into a single box. You get the premium MatchMaster micrometer seating die paired with a full-length sizing die, which is a great fit for anyone chasing tight groups with the 6.5 PRC without wanting to mess around with neck bushings. It is built in the USA and backed by the RCBS Limited Lifetime Warranty.
What Sets the MatchMaster Duo Seating Die Apart
The star of this set is the seating die. It uses a large, oversized micrometer knob with easy-to-read markings that let you dial seating depth in one-thousandth of an inch increments, so you can repeat a load again and again or fine-tune your way to a node during load development. The real hook is the bullet loading window and retention system. Instead of balancing a bullet on the case mouth and hoping it stays put, you drop the bullet through the window and run the press. A free-floating, self-centering seating stem and internal sleeve hold the bullet in line with the case for genuinely concentric ammo.
No Bushings, No Guesswork With the 6.5 PRC Sizing Die
The other half of the set is a standard full-length sizing die, not a bushing die. That means there is nothing extra to purchase and no bushing to swap, which keeps setup simple. It sizes the case back down for reliable chambering and feeding, making it a solid choice for hunting rounds, range brass, and anything you want to run through a repeater without hiccups.
Who the MatchMaster Duo 6.5 PRC Set Suits
Both dies use the standard 7/8-14 thread, so they thread right into any common single-stage or turret press. The 6.5 PRC is a flat-shooting, hard-hitting long-range cartridge, and this set gives precision reloaders the seating control they want while keeping the sizing side straightforward and dependable. It is an easy recommendation for shooters who care about consistency on the bench and downrange.
Key Specifications
- Manufacturer: RCBS
- Model: MatchMaster Duo Die Set
- Caliber: 6.5mm PRC
- Projectile Caliber: .264
- Dies in Set: 2 (Seating + Full-Length Sizing)
- Seating Die Type: Micrometer-Adjustable with Bullet Window
- Sizing Die Type: Full-Length (No Bushings)
- Adjustment Increment: 0.001 inch
- Thread: 7/8-14
- Material: Steel
- Country of Origin: United States
- Warranty: Limited Lifetime
- Manufacturer Part Number: 32104
- UPC: 850079710290
- Shipping Weight: 0.68 lb
What’s Included
- RCBS MatchMaster Micrometer Seating Die (6.5 PRC)
- RCBS Full-Length Sizing Die (6.5 PRC)
- Instruction manual
Frequently Asked Questions
Does the MatchMaster Duo Set use neck bushings?
No. The Duo set uses a standard full-length sizing die, so there are no bushings to buy or swap out. This is the main difference between the Duo and the other MatchMaster sets, which rely on a bushing-style sizer. It keeps your setup simpler and the set ready to go right out of the box.
What makes the MatchMaster seating die in this set special?
The seating die uses an oversized micrometer knob that adjusts seating depth in one-thousandth of an inch increments for repeatable results. It also has a bullet loading window with a retention system, so you drop the bullet through the window instead of balancing it on the case mouth. A free-floating, self-centering stem and internal sleeve keep the bullet aligned with the case for concentric ammo.
Will these dies fit my press?
Yes. Both dies in the 6.5 PRC Duo set use the standard 7/8-14 thread, so they thread into virtually any common single-stage or turret reloading press. You will want the correct shellholder for 6.5 PRC, which is not included.
Can the seating die crimp the bullet?
No. Like other MatchMaster seating dies, this one is built strictly for precise seating depth and does not crimp. For match and long-range loads that is generally what you want, since many precision reloaders skip crimping to preserve consistency.



Reviews
There are no reviews yet.