Description
The .220 Swift is a screamer of a varmint round, and getting the most out of it comes down to consistency at the bench. This RCBS Matchmaster seater die is a stand-alone bullet seating die built for that job. It threads into any standard 7/8-14 press, so it drops right into your existing single-stage or turret setup without any special tooling. Note that this is a seater only, so you'll pair it with a full-length or neck sizing die to round out your process.
What Sets the Matchmaster .220 Swift Seater Apart
The heart of this die is a free-floating, self-centering seating stem that aligns the bullet with the case mouth as it seats. Inside, a cartridge-specific sleeve catches and guides the bullet in perfect line with the case, which is what gives you the low runout and concentric ammo that shrinks groups downrange. Case concentricity is one of the biggest levers you have on accuracy, and this die is designed to nail it shot after shot.
Dialing In Seating Depth on the .220 Swift Die
Up top sits a large oversized micrometer knob with big, easy-to-read hash marks. You can adjust seating depth in .001-inch increments and get exactly what you dialed, which makes tuning your overall cartridge length to a specific bullet or rifle simple and repeatable. The exclusive loading window is a nice touch too. Instead of balancing a bullet on the case mouth, you just drop it through the window and run the press, keeping your fingers clear of the ram in the process.
Built Like RCBS Means It
Each Matchmaster die is machined from case-hardened steel, precision-drilled and reamed to tight tolerances, then hand polished and finished in a deep blue like a fine firearm. It's made in the USA and backed by the RCBS Limited Lifetime Warranty. Handloaders who run these tend to come back for more, and it's the kind of tool that earns a permanent spot on the bench for anyone serious about loading match-quality .220 Swift ammo at home.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 10740
- UPC: 850079710061
- Product Line: Matchmaster Competition
- Die Type: Bullet Seating Die Only
- Caliber: .220 Swift
- Thread: Standard 7/8-14
- Seating Adjustment: Oversized micrometer, .001-inch increments
- Seating Stem: Free-floating, self-centering
- Bullet Loading: Loading window with bullet retention system
- Material: Case-hardened steel
- Finish: Deep blued, hand polished
- Country of Origin: Made in USA
- Warranty: RCBS Limited Lifetime Warranty
- Shipping Weight: 0.18 lbs
What’s Included
- RCBS Matchmaster Competition Bullet Seating Die (.220 Swift)
- Green RCBS die storage box
Frequently Asked Questions
Does the Matchmaster .220 Swift seater die also size cases?
No, this is a dedicated bullet seating die only. You'll want to pair it with a full-length or neck sizing die to have a complete reloading setup. It handles the seating step and does it exceptionally well, but sizing is a separate operation.
How is seating depth adjusted on this die?
Seating depth is set with the oversized micrometer knob on top of the die. It's calibrated in .001-inch increments with large, easy-to-read markings, so you can dial in and repeat an exact overall cartridge length. Whatever you set is what you get, which makes load tuning straightforward.
Will the Matchmaster seater die fit my press?
Yes, it uses a standard 7/8-14 thread, so it threads into virtually any single-stage or turret press. There's no proprietary press or special hardware required. Just screw it in and you're ready to seat bullets.
What makes this die produce more concentric ammo?
The die uses a free-floating, self-centering seating stem along with an internal sleeve that aligns the bullet and case before they meet. That alignment carries all the way through the seating stroke, which keeps runout low and produces straighter, more concentric rounds. For a fast, flat-shooting cartridge like the .220 Swift, that consistency shows up on target.




Reviews
There are no reviews yet.