Description
The RCBS Matchmaster Competition Neck Bushing Die Set is built for .300 Norma Mag handloaders who care about neck tension down to the thousandth. This two-die set pairs an interchangeable-bushing neck sizing die with a micrometer-adjustable seating die, giving you the kind of repeatable control that benchrest and long-range precision crowds have leaned on for years. Instead of a fixed-diameter die that squeezes every neck the same way, you drop in the bushing that matches your brass and bullet, set the tension you want, and get on with building consistent ammo.
What the Matchmaster Neck Sizing Die Brings to the Bench
The sizing die uses RCBS self-centering steel neck bushings to set neck tension while leaving the body dimensions of your fired cases alone. Because it only works the neck, you keep brass movement to a minimum and stretch case life compared to running everything through a standard full-length die. A titanium carbonitride coated expander handles the inside of the neck with smooth case extraction and less brass buildup on the expander, which keeps that neck from getting overworked pass after pass.
Seating Depth You Can Trust with the Matchmaster Seater
The other half of this set is the Matchmaster Competition seating die, and it is the part most reloaders fall in love with. It features a bullet seating window with a retention system, so you simply set the bullet in the window and raise the case to seat it, no fumbling a long magnum bullet down into the die. The large oversize micrometer head has big, easy-to-read markings and a free-floating, self-centering seating stem, so you can repeat seating depth to the thousandth and keep runout tight.
Fitting the .300 Norma Mag Matchmaster Set to Your Press
Both dies run the standard 7/8"-14 thread, so they thread right into any common single-stage or turret press. One thing to plan for: the neck bushing itself is sold separately. You pick the diameter based on your loaded neck measurement, which lets you fine-tune tension to your exact brass and bullet combo.
Key Specifications
- Manufacturer: RCBS
- Model: Matchmaster Competition Neck Bushing Set
- Caliber: .300 Norma Magnum
- Die Type: Neck Sizing Bushing Die Set
- Pieces: 2 dies (neck sizing die and seating die)
- Thread: 7/8"-14 standard
- Expander: Titanium Carbonitride coated
- Seating Adjustment: Oversize micrometer with free-floating, self-centering stem
- Neck Bushing: Required, sold separately
- Warranty: Limited Lifetime
- MPN: 31510
- UPC: 604544654264
- Shipping Weight: 0.5 lb
What’s Included
- RCBS Matchmaster Competition neck sizing die (.300 Norma Mag)
- RCBS Matchmaster Competition micrometer seating die
Frequently Asked Questions
Does the Matchmaster neck bushing die set come with a bushing?
No, the neck bushing is sold separately so you can match the diameter to your exact brass and bullet. The sizing die needs a bushing installed to work. RCBS suggests keeping bushings one to two sizes above and below your target diameter so you can fine-tune neck tension.
How do I pick the right bushing size for my .300 Norma Mag loads?
The easy method is to measure the outside neck diameter of a loaded round and subtract .002" to .003" depending on how much tension you want. That leaves roughly .001" of brass spring-back for correct tension. You can also measure neck wall thickness, multiply by two, add your bullet diameter, and subtract .001".
What does the neck-only sizing do for my brass?
Since the die only sizes the neck and leaves the case body alone, your brass works less and lasts longer. The tradeoff is that neck-sized cases should be reloaded for the same rifle they were fired in. If your brass moves between rifles, a full-length bushing set is the better call.
Will this die set fit my press?
Yes, both dies use the standard 7/8"-14 thread, so they thread into any common single-stage or turret press. The set includes the bushing neck sizing die and the Matchmaster micrometer seating die with its loading window and bullet retention system.



Reviews
There are no reviews yet.