Description
The RCBS Matchmaster Competition Neck Size Bushing Die Set is aimed squarely at the 7mm Rem Mag reloader who cares about every last detail on the bench. Rather than working the entire case body, the neck sizing die only touches the case neck, using interchangeable neck bushings to set the exact amount of bullet tension you want. That approach keeps your fired brass close to chamber dimensions and cuts down on how hard the brass gets worked, which is a big part of why benchrest and long-range crowds have leaned on bushing dies for years.
What Makes the Matchmaster Neck Die Different
The neck sizing die runs a titanium nitride coated expander that pulls through the neck smoother and resists the brass buildup you get on bare steel expanders over time. Less friction means less neck stretch and a more consistent release on every case. Keep in mind the sizing die uses interchangeable neck bushings that are sold separately, so you pick the bushing that matches the tension you're after. A good starting point is measuring the outside neck diameter of a loaded round and subtracting around .002 to .003 inches to account for brass spring back.
Seating Die Built for Repeatable Depth
The set pairs that sizing die with the Matchmaster Competition seating die, and this is where the system really shines. It uses a bullet seating window with a retaining system, so you set the bullet in the window and raise the case to seat it cleanly without fumbling. A free-floating, self-centering seating stem keeps everything concentric, while the large oversize micrometer head has big, easy-to-read markings that let you dial seating depth in one-thousandth increments. The seater carries a deep blued finish machined to the standard you'd expect from a premium die.
Fitting It Into Your Setup
Both dies use the standard 7/8 inch-14 thread, so they'll thread right into any common single stage or turret press. Whether or not you turn your case necks, this set is ready to size to your target tension and stretch the life of your 7mm Rem Mag brass. It's backed by RCBS's limited lifetime warranty and made in the USA.
Key Specifications
- Manufacturer: RCBS
- Model / MPN: 13610
- UPC: 604544654134
- Caliber: 7mm Rem Mag
- Die Set Type: Competition Neck Size Bushing Die Set
- Dies Included: Neck Sizing Die and Bullet Seating Die
- Neck Bushing: Interchangeable, controls neck tension (sold separately)
- Expander: Titanium Nitride coated
- Seating Adjustment: Oversize micrometer, .001 inch increments
- Seating Stem: Free-floating, self-centering
- Material: Case-hardened steel
- Thread: 7/8 inch-14
- Finish: Deep blued seater die
- Country of Origin: Made in USA
- Warranty: Limited Lifetime Warranty
- Shipping Weight: 1.45 lbs
What’s Included
- Matchmaster Competition Neck Sizing Die (with titanium nitride expander)
- Matchmaster Competition Bullet Seating Die (with micrometer and bullet seating window)
Frequently Asked Questions
Do the neck bushings come with the Matchmaster neck size die set?
No, the neck bushings are sold separately. The sizing die is designed to use RCBS interchangeable neck bushings so you can pick the exact size for the tension you want. To choose the right one, measure the outside neck diameter of a loaded cartridge and subtract about .002 to .003 inches to allow for brass spring back.
What's the difference between neck sizing and full-length sizing with this die?
The Matchmaster neck size die only resizes the case neck and leaves the body dimensions of your fired brass alone. This keeps the brass fitted to your chamber and reduces how much the case gets worked, which helps extend brass life. If you need to resize the full case body for use across different rifles, the full-length Matchmaster set is the better pick.
Will this die set work in a standard reloading press?
Yes. Both the sizing die and the seating die use the standard 7/8 inch-14 thread, so they'll thread into common single stage and turret presses. No special press is required to run them.
How precise is the seating depth adjustment on the Matchmaster seater?
The seating die uses a large oversize micrometer head with big, easy-to-read markings that let you adjust seating depth in one-thousandth of an inch increments. Paired with a free-floating, self-centering stem, it keeps your seating consistent and concentric round after round. The bullet seating window with retaining system also makes loading each bullet quick and clean.




Reviews
There are no reviews yet.