Description
The RCBS Matchmaster Competition Neck Bushing Die Set in .300 RUM is aimed squarely at handloaders who care about the small details that add up to better groups. This is a two-die set pairing a neck sizing bushing die with a Matchmaster competition seating die, both machined from case hardened steel with inside surfaces that are precision drilled, reamed, and hand polished. The bushing system is the real draw here, letting you swap interchangeable neck bushings to set neck tension exactly where your load likes it instead of being stuck with a one-size expander ball.
What the Matchmaster Bushing System Does for Your Brass
Neck bushings have been a staple on benchrest and long-range precision benches for a long time, and for good reason. By sizing only the neck with a bushing matched to your brass, you keep the case working to a minimum, which helps your brass last through more firings before the necks start splitting or work hardening. To pick the right bushing, measure the outside neck diameter of a loaded round and subtract .002 to .003 inches to account for brass springback. The sizing die also carries a titanium carbo nitride coated expander that cuts down on brass buildup and makes case extraction smooth and consistent.
Seating That Keeps Things Straight on the .300 RUM
The Matchmaster seating die is where a lot of the character shows up. It uses a bullet seating window with a retention system, so you drop the bullet into the window and raise the case to seat it, no balancing a bullet on the case mouth. A free-floating, self-centering seating stem keeps everything aligned for concentric results, and the large oversize micrometer makes dialing in seating depth quick and easy to read.
Both dies run the standard 7/8-14 thread, so they fit any common single stage press, and they are made in the USA and backed by a limited lifetime warranty. Keep in mind the neck bushings themselves are sold separately, so plan on picking the right diameter bushing for your particular brass and load.
Key Specifications
- Manufacturer: RCBS
- Model: Matchmaster Competition Neck Bushing Set
- Caliber: .300 Remington Ultra Magnum (.300 RUM)
- Manufacturer Part Number: 17610
- UPC: 604544654226
- Die Type: Neck Size Bushing
- Pieces in Set: 2 (Neck Sizing Die, Seating Die)
- Thread: 7/8-14
- Material: Case Hardened Steel
- Expander: Titanium Carbo Nitride Coated
- Neck Bushing: Sold Separately
- Country of Origin: Made in USA
- Warranty: Limited Lifetime
- Shipping Weight: 1.47 lbs
What’s Included
- Matchmaster Neck Sizing Bushing Die (.300 RUM)
- Matchmaster Competition Seating Die (.300 RUM)
Frequently Asked Questions
Does the Matchmaster Neck Bushing Die Set come with a neck bushing?
No, the neck bushings are sold separately so you can match the exact diameter to your brass and desired neck tension. To find the right size, measure the outside neck diameter of a loaded cartridge and subtract .002 to .003 inches to allow for brass springback. You will want at least one correctly sized bushing on hand before you start sizing.
What dies are included in this .300 RUM set?
This is a two-die set that includes the Matchmaster neck sizing bushing die and the Matchmaster competition seating die. The sizing die handles neck tension through interchangeable bushings, while the seating die uses a micrometer adjustment and a bullet seating window for repeatable, concentric seating. A shell holder is not included and would need to be purchased separately.
Will these dies fit my press?
Yes, both dies use the standard 7/8-14 thread, so they thread into any common single stage reloading press. There is nothing proprietary about the mounting, so you can run them in the same press you use for your other die sets.
Why choose a neck bushing die over a standard neck sizing die?
A bushing die lets you precisely control neck tension by swapping bushings of different diameters, rather than relying on a fixed expander ball. This approach works the brass less, which helps extend case life, and it is the system benchrest and long-range precision reloaders have trusted for years. For a hard-kicking magnum like the .300 RUM, that extra control over neck tension can pay off in consistency.





Reviews
There are no reviews yet.