Description
The RCBS Matchmaster Competition Full-Length Bushing Die Set for 6mm Creedmoor brings together the best bits of the old Gold Medal and Competition die lines into one package aimed squarely at long-range and benchrest handloaders. Each die is machined from case-hardened steel, with the interior surfaces precision-drilled, reamed, and hand polished so your brass runs in and out clean and your dimensions stay consistent round after round. This is the kind of die set folks have in mind when they say buy once, cry once.
What the Bushing Sizer Does for Your Brass
The full-length sizing die uses interchangeable neck bushings to control exactly how much tension your necks put on the bullet. Instead of dragging an expander ball back through the neck and pulling things out of alignment, you drop in the right bushing and size the body, bump the shoulder, and set your neck tension all in one stroke. That means less work hardening, longer case life, and better concentricity. Worth noting: the neck bushings are sold separately. To pick the right one, measure the outside neck diameter of a loaded round and subtract about .002 to .003 inch to allow for brass spring back. RCBS recommends keeping a bushing or two above and below your target size on hand so you can fine-tune tension.
The MatchMaster Seater That Makes Loading Easy
The seating die is where this set really shines. It features a bullet seating window with a retaining system, so you simply set the bullet in the window and raise the case to seat it, no more balancing a bullet on a case mouth. Pair that with a micrometer-adjustable, free-floating, self-centering seating stem and you get dead-repeatable seating depth dialed to a thousandth of an inch, plus the kind of concentricity match shooters chase. The oversized micrometer knob has large numbers and hash marks that are easy to read and easy to turn.
The seater is beautifully finished in a deep blued coat that looks right at home next to fine firearms, and the whole set ships in a green RCBS die box for tidy storage on the bench.
Key Specifications
- Manufacturer: RCBS
- Series: Matchmaster Competition
- Cartridge: 6mm Creedmoor
- Die Type: Full-Length Bushing Sizing and Micrometer Bullet Seating
- Pieces: 2-Die Set
- Material: Case-Hardened Steel
- Seating Adjustment: Micrometer, Free-Floating Self-Centering Stem
- Neck Bushings: Interchangeable, Sold Separately
- Finish: Deep Blued Seater Die
- Manufacturer Part Number: 31808
- UPC: 604544653946
- Shipping Weight: 1.26 lbs
What’s Included
- Full-length bushing sizing die
- MatchMaster competition micrometer bullet seating die
- Green RCBS die storage box
Frequently Asked Questions
Does the Matchmaster bushing die set come with neck bushings?
No, the neck bushings are sold separately. The sizing die is designed to accept interchangeable bushings so you can tune neck tension to your brass and bullet combination. RCBS, Redding, Hornady, and Wilson bushings are interchangeable, so you have options when sourcing them.
How do I figure out which neck bushing size I need for 6mm Creedmoor?
Measure the outside neck diameter of a loaded round and subtract about .002 to .003 inch to account for brass spring back. You can also multiply your neck wall thickness by two, add the bullet diameter, and subtract .001 inch. RCBS suggests keeping a bushing one or two sizes above and below your target so you can dial in the exact tension you want.
What makes the MatchMaster seating die different from a standard seater?
The MatchMaster seater has a bullet seating window with a retaining system, so you drop the bullet in and raise the case to seat it rather than balancing it on the case mouth. It uses a micrometer-adjustable, free-floating, self-centering stem that returns to your setting and produces highly concentric rounds. The oversized micrometer knob has large, easy-to-read markings for repeatable seating depth.
Can the sizing die be used without a bushing?
Yes, the sizing die can run without a bushing installed to size the case body and bump the shoulder without touching the neck. That said, the whole point of this set is controlling neck tension with the bushing, so most handloaders will want the correct bushing in place to get the benefits of the bushing-style design.




Reviews
There are no reviews yet.