0
0

RCBS Matchmaster Full-Length Bushing Die Set 6mm BR Remington

UPC: 604544653861

$173.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The 6mm BR Remington has earned its reputation as one of the most accurate benchrest cartridges around, and this RCBS Matchmaster set gives you the tools to feed it right. It's a two-die set that pairs a full-length bushing sizing die with the Matchmaster competition seater, so you're covered from brass prep through final seating with gear that's built for consistency run after run.

What the 6mm BR Matchmaster Sizing Die Brings

The sizing die runs on an interchangeable neck bushing system, which lets you dial in exactly how much neck tension you want on the bullet instead of settling for whatever a standard die gives you. Bushings are sold separately, and the usual approach is to measure the outside neck diameter of a loaded round and subtract about .002 to .003 inches to account for a little brass spring-back. The sizing die also comes with a titanium carbo-nitride coated expander that cuts down on brass buildup and makes case extraction smooth, so your necks stay consistent and your decapping stays clean.

Why the Matchmaster Seater Earns Its Keep

This is where the set really stands out. The seater uses a side loading window with a bullet retention system, so you drop the bullet in through the port and it sits there held square to the case mouth until you run the press. No more balancing a bullet on the case neck and hoping it goes in straight. Inside, a free-floating, self-centering sleeve aligns the case and bullet before they ever meet, then guides them together for excellent concentricity. The large oversize micrometer adjusts seating depth in clear .001 inch increments, which makes load development and chasing the lands a lot less fiddly.

Both dies use the standard 7/8-14 thread, so they'll thread into any common reloading press. For the 6mm BR shooter chasing the smallest groups possible, this set hits the sweet spot of refined features and RCBS build quality, all backed by a limited lifetime warranty.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number: 16108
  • UPC: 604544653861
  • Caliber: 6mm BR Remington
  • Die Type: Full-Length Bushing Sizer and Competition Seater
  • Number of Dies: 2
  • Thread Size: 7/8-14
  • Seater Adjustment: Micrometer, .001 inch increments
  • Neck Tension Control: Interchangeable neck bushings (sold separately)
  • Expander: Titanium Carbo-Nitride coated
  • Material: Case-hardened steel
  • Country of Origin: USA
  • Shellholder Included: No
  • Warranty: Limited Lifetime
  • Shipping Weight: 1.32 lbs

What’s Included

  • Full-length bushing sizing die
  • Matchmaster competition micrometer seating die
  • Spare decapping pin holder (non-expander piece)
  • Instruction manual
  • Reloading data sheet
  • Storage case

Frequently Asked Questions

Do I need to buy bushings separately for the Matchmaster 6mm BR set?

Yes. The sizing die uses interchangeable neck bushings that are sold separately so you can tune neck tension to your brass and bullets. To find the right size, measure the outside neck diameter of a loaded round and subtract about .002 to .003 inches. RCBS suggests keeping a bushing or two above and below your target diameter on hand.

Is a shellholder included with this die set?

No, a shellholder is not included. You'll need the correct RCBS shellholder for the 6mm BR Remington case head, which uses the same size as several other popular cartridges. Most reloaders already have it on the bench, but it's worth confirming before your first session.

What makes the Matchmaster seating die different from a standard competition seater?

The standout feature is the side loading window paired with a bullet retention system. You drop the bullet in through the window and it stays held in place, aligned square to the case mouth, until you cycle the press. Combined with a free-floating self-centering sleeve and a large micrometer that adjusts in .001 inch steps, it delivers excellent concentricity and makes seating faster and cleaner.

Will these dies fit my reloading press?

Both dies use the standard 7/8-14 thread, so they'll thread into any common single-stage or turret press. Keep in mind the Matchmaster seater is designed for standard shellholders rather than extended ones, which can affect bullet window clearance on certain short cartridges, so it pairs best with a standard press setup.

Additional information

UPC

604544653861

Manufacturer

Manufacturer Part Number

16108

Shipping Weight

1.32

Reviews

There are no reviews yet.

Be the first to review “RCBS Matchmaster Full-Length Bushing Die Set 6mm BR Remington”