Description
The RCBS Matchmaster Full-Length Bushing Die Set in 6.5x47mm Lapua is RCBS's top-tier reloading setup, blending the best ideas from their old Gold Medal and Competition lines into one two-die package. You get a full-length bushing sizing die and a micrometer-adjustable seating die, both machined from RCBS proprietary die steel, case hardened, and polished for a clean interior finish. For anyone loading the 6.5×47 Lapua for precision rifle work or long-range matches, this is about as refined as factory dies get.
What the 6.5×47 Lapua Bushing Sizing Die Does
The sizing die uses interchangeable neck bushings so you can control exactly how much neck tension you want. Bushings size the neck from the outside, and swapping between different diameters lets you fine-tune grip on the bullet without overworking your brass, which helps your cases last longer. The decapping rod comes pre-installed with a titanium carbo-nitride coated expander ball that cuts down on brass buildup and makes case extraction smoother. If you'd rather not run the inside of the neck, RCBS tucks a separate decapping pin holder in the box so you can decap only. Worth noting that neck bushings are sold separately, so you'll want to pick up the right diameter for your brass before you start.
Seating Bullets With the Matchmaster Seater
The seater die is where this set really shines. It's finished with a deep blued look like a fine firearm and uses a large oversized micrometer with easy-to-read hash marks, so you can dial changes down to a thousandth of an inch. The free-floating, self-centering seating stem keeps bullets aligned with the case for consistent, concentric seating. There's also a bullet loading window with a retention system, so you drop the bullet in, run the press, and skip the finger-pinching fumble of hand-aligning every round.
Both dies use standard 7/8"-14 threads, so they'll thread right into any common single-stage press, and RCBS backs the set with a limited lifetime warranty. Made in the USA.
Key Specifications
- Manufacturer: RCBS
- Caliber: 6.5x47mm Lapua
- Projectile Caliber: .264 / 6.5mm
- Die Type: Full-Length Bushing Sizing + Micrometer Seating
- Dies In Set: 2
- Thread: 7/8"-14
- Die Material: Proprietary die steel, case hardened
- Expander: Titanium Carbo-Nitride coated
- Neck Bushing: Sold separately
- Warranty: Limited Lifetime
- Country of Origin: USA
- Manufacturer Part Number: 12908
- UPC: 604544653779
- Shipping Weight: 1.25 lbs
What’s Included
- Full-length bushing sizing die
- Micrometer-adjustable bullet seating die
- TiCN-coated expander ball (pre-installed on decapping rod)
- Separate decapping pin holder (non-expander piece)
- Storage case
- Instruction manual and reloading data sheet
Frequently Asked Questions
Does the Matchmaster bushing die set come with a neck bushing?
No, neck bushings are sold separately for this set. RCBS suggests keeping bushings one to two sizes above and below your target diameter so you can fine-tune neck tension. Measure a loaded round's neck diameter and subtract your desired tension to figure out which size you need.
Can I use these 6.5×47 Lapua dies without sizing the inside of the case neck?
Yes. The decapping rod ships with a titanium carbo-nitride expander ball installed, but RCBS includes a separate decapping pin holder in the box. Swap it in and you can decap only while letting the bushing handle all the neck sizing from the outside.
What makes the Matchmaster seating die different from a standard seater?
The seater uses a free-floating, self-centering stem paired with a bullet loading window and retention system, so bullets stay aligned with the case for straight, concentric seating. The oversized micrometer lets you dial seating depth to a thousandth of an inch with clear, easy-to-read markings. It takes the guesswork and finger-pinching out of seating match ammo.
Will these dies fit my reloading press?
Yes. Both dies use the standard 7/8"-14 thread, so they thread into any common single-stage or turret press. You'll also need the correct shellholder for the 6.5×47 Lapua case head, which is not included.




Reviews
There are no reviews yet.