Description
The RCBS Matchmaster Full-Length Bushing Die Set is built for the 6.5 PRC reloader who chases tight groups and consistent velocity numbers. This two-die set pairs a full-length bushing sizing die with a micrometer-style seating die, giving you the kind of control over neck tension and seating depth that benchrest and long-range precision folks have leaned on for years. Both dies use standard 7/8-14 threads, so they drop right into any common single stage or turret press.
What Sets the 6.5 PRC Matchmaster Dies Apart
The magic here is the bushing system. Instead of relying on a fixed expander to set neck tension, the sizing die uses interchangeable neck bushings that let you fine-tune exactly how much grip your case necks put on the bullet. To pick the right bushing, you measure the outside neck diameter of a loaded round and subtract about .002 to .003 inch to account for brass spring back. Keep in mind the bushings are sold separately, so you'll want to order the correct size for your brass and bullet combo. The die also includes a titanium carbo nitride expander that cuts down on brass buildup and helps the case pull off smooth and clean.
Seating Depth You Can Trust
The Matchmaster seater die is the star of the show for a lot of handloaders. It carries a deep blued finish like you'd see on a fine rifle, plus a large oversized micrometer knob with big, easy-to-read letters and hash marks so you can dial seating depth without guesswork. There's also a bullet seating window with a retention system, which lets you watch the bullet feed into the case and confirm it's going in straight.
Every die in this set is machined from steel with internal surfaces that are precision drilled, reamed, and hand polished. RCBS backs these up with a limited lifetime warranty, so this is a set you buy once and run for the long haul on your 6.5 PRC loads.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 32108
- UPC: 604544653960
- Cartridge: 6.5 PRC
- Die Style: Full-Length Bushing Die Set
- Number of Dies: 2
- Thread Size: 7/8-14
- Die Material: Steel
- Expander: Titanium Carbo Nitride
- Seater Type: Micrometer with bullet seating window
- Warranty: Limited Lifetime
- Shipping Weight: 1.41 lbs
What’s Included
- Full-length bushing sizing die (with titanium carbo nitride expander and decapping assembly)
- Micrometer bullet seating die
Frequently Asked Questions
Does the Matchmaster 6.5 PRC die set come with neck bushings?
No, the neck bushings are sold separately. This lets you pick the exact bushing size that matches your brass and bullet combination. To find the right size, measure the outside neck diameter of a loaded round and subtract about .002 to .003 inch to allow for brass spring back.
What dies are included in this set?
You get two dies: a full-length bushing sizing die and a micrometer-style bullet seating die. The sizing die handles resizing, decapping, and neck tension through the bushing system, while the seater gives you precise, repeatable seating depth control.
Will these dies fit my reloading press?
Yes. Both dies use the standard 7/8-14 thread, which is the industry-standard size for single stage and turret presses. That means they'll thread right into just about any common reloading press.
What makes the bushing sizing die different from a standard RCBS die?
A standard die uses a fixed sizing bore and expander to set neck tension, while the bushing die lets you swap interchangeable bushings to control exactly how much tension the neck puts on the bullet. This approach works brass less and gives you more consistent neck tension, which is why precision and benchrest handloaders favor it.


Reviews
There are no reviews yet.