Description
The RCBS Matchmaster Full-Length Bushing Die Set is built for folks who take their .300 Norma Mag brass seriously. It brings together the best ideas from the old Gold Medal and Competition lines into one two-die set: a bushing-style full-length sizing die and the Matchmaster micrometer seating die. The sizer runs interchangeable neck bushings, so instead of being stuck with a fixed amount of neck tension, you pick the exact bushing diameter that matches your brass and your load. To find the right one, measure the outside neck diameter of a loaded round and subtract about .002 to .003 inches to account for brass spring back. Keep in mind bushings are sold separately, which is standard for this style of die.
What Sets This .300 Norma Mag Die Set Apart
The sizing die uses a titanium carbo-nitride coated expander. That coating cuts down on brass buildup and makes case extraction noticeably smoother, which also means less stretch and working of the case neck over time. The decapping rod comes pre-installed with the TiCN expander ball, and RCBS tosses in a separate decapping pin holder if you'd rather deprime without running the expander through the neck. Both dies use the standard 7/8-14 thread, so they drop right into any common single-stage or turret press.
Seating That Keeps Things Straight
The Matchmaster seating die is the real headliner. It features a bullet loading window that lets you set the bullet in by hand, no more fighting to balance it on the case mouth, and a self-centering sliding sleeve aligns the case and bullet before they ever touch. A large, laser-etched micrometer cap makes seating depth adjustments easy to read and repeat in .001 inch steps, and the free-floating stem keeps runout down where you want it for long-range work.
For anyone loading the big .300 Norma Mag for precision rifle or long-range hunting, this set gives you the control to fine-tune neck tension and seating depth with the kind of consistency that shows up on paper. It's made in the USA and backed by an RCBS limited lifetime warranty.
Key Specifications
- Manufacturer: RCBS
- Caliber: .300 Norma Magnum
- Manufacturer Part Number: 31508
- UPC: 604544653939
- Die Type: Full-Length Bushing Sizer and Bullet Seater
- Number of Dies: 2
- Thread Size: 7/8-14
- Expander: Titanium Carbo-Nitride coated
- Seating Adjustment: Micrometer, free-floating self-centering stem
- Neck Bushing: Sold separately
- Material: Steel
- Country of Origin: USA
- Warranty: Limited Lifetime
- Shipping Weight: 1.44 lbs
What’s Included
- Full-length bushing sizing die
- Matchmaster micrometer bullet seating die
- TiCN-coated expander/decapping rod assembly (pre-installed)
- Separate decapping pin holder (non-expander piece)
- Instruction manual
- Reloading data sheet
Frequently Asked Questions
Does the Matchmaster .300 Norma Mag die set come with a neck bushing?
No, neck bushings are sold separately with this set. To pick the right one, measure the outside neck diameter of a loaded cartridge and subtract about .002 to .003 inches to allow for brass spring back. RCBS bushings also interchange with Redding, Hornady, and Wilson dies, so you've got options for sourcing them.
What's the advantage of a bushing-style sizing die over a standard die?
A bushing die lets you control exactly how much neck tension you're putting on each round by swapping bushing diameters, rather than being locked into a fixed amount. That means you can fine-tune your loads for better consistency and keep your brass working less, which helps case life. It's a big reason precision and long-range handloaders favor this setup.
Will these dies fit a standard reloading press?
Yes. Both dies use the common 7/8-14 thread, so they'll thread into any standard single-stage or turret press without issue. You will need the correct shellholder for the .300 Norma Mag case, which is not included.
What makes the Matchmaster seating die worth it?
The seating die features a bullet loading window that lets you drop the bullet in by hand instead of balancing it on the case mouth, and a self-centering sleeve that aligns case and bullet before they meet. Combined with the free-floating stem and a laser-etched micrometer for precise, repeatable depth changes, it produces excellent concentricity for tight groups. It's the standout piece of the set for a lot of reloaders.




Reviews
There are no reviews yet.