Description
The RCBS Matchmaster Competition Full-Length Bushing Die Set is built for the handloader who wants to chase single-digit extreme spreads out of their .260 Remington. It brings together a full-length bushing sizing die and a competition-grade micrometer seating die, pulling the best traits from RCBS's Gold Medal and Competition die lines into one set. Each die is machined from case-hardened steel with interior surfaces precision-drilled, reamed, and hand-polished, so your brass gets worked over smoothly and consistently from the first round to the thousandth.
What Sets the Matchmaster Sizing Die Apart
The full-length sizer uses interchangeable neck bushings to dial in exactly how much neck tension you want. Instead of overworking the brass with a fixed-diameter neck, you pick the bushing that matches your loaded neck dimension, which means less case stretch, longer brass life, and more uniform bullet grip round to round. Keep in mind the bushings are sold separately so you can match them to your specific brass and tension preference. The quick way to size a bushing is to measure the outside neck diameter of a loaded round and subtract about .002 to .003 inches to account for brass springback.
Seating Depth You Can Trust With the Matchmaster Seater
The Matchmaster seating die is where this set really shines. It features a bullet seating window with a retaining system, so you drop the bullet into the window and raise the case to seat it, no balancing the bullet on the case mouth. Pair that with the free-floating, self-centering seating stem and an oversized micrometer adjustment knob with bold, easy-to-read markings, and you get repeatable seating depth that is simple to reset load after load.
Both dies thread into any standard press with the common 7/8 inch-14 thread, so this set drops right into the equipment you already own. For anyone loading .260 Rem for long-range or match work, this is a serious upgrade in consistency.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 12808
- UPC: 604544653762
- Caliber: .260 Remington
- Die Type: Full-Length Bushing Die Set
- Die Set Series: Matchmaster Competition
- Material: Case-hardened steel
- Thread Size: 7/8 inch-14
- Seating Adjustment: Micrometer, free-floating self-centering stem
- Neck Tension Control: Interchangeable neck bushings (sold separately)
- Country of Origin: USA
- Shipping Weight: 1.44 lbs
What’s Included
- Full-length bushing sizing die
- Matchmaster competition micrometer bullet seating die
Frequently Asked Questions
Do the neck bushings come with the Matchmaster .260 Remington die set?
No, the neck bushings are sold separately so you can match them precisely to your brass and your preferred neck tension. To pick the right size, measure the outside neck diameter of a loaded round and subtract about .002 to .003 inches to allow for brass springback. This lets you fine-tune tension rather than being locked into one fixed diameter.
What dies are in this Matchmaster Competition set?
The set includes a full-length bushing sizing die and the Matchmaster competition bullet seating die. The sizer handles full-length resizing and neck tension via bushings, while the seater uses a micrometer and a bullet window with a retaining system for repeatable seating depth.
Will this die set fit my reloading press?
Yes. Both dies use the industry-standard 7/8 inch-14 thread, so they thread into any standard single-stage or progressive press. No special adapters are needed.
What makes the Matchmaster seating die different from a standard seater?
The Matchmaster seater uses a bullet seating window with a retaining system, so you place the bullet in the window and raise the case to seat it instead of balancing the bullet on the case mouth. Combined with a free-floating, self-centering seating stem and a large, easy-to-read micrometer adjustment, it produces very consistent seating depth. That consistency is a big help when you are chasing tight extreme spreads and good concentricity.




Reviews
There are no reviews yet.