Description
The RCBS Little Dandy Powder Rotor #3 is a fixed charge, interchangeable rotor built to drop in to the RCBS Little Dandy Powder Measure (sold separately). Instead of dialing in a micrometer every time, you just slot in the right rotor for your load and start throwing charges. The rotor meters powder by volume, so the exact grain weight it throws will depend on which powder you run through it. RCBS publishes a rotor charge chart that pairs each rotor number with specific powders and charge weights, and that chart is the thing to check before you buy to make sure #3 lands where you need it.
Where the #3 Little Dandy Rotor Fits
The Little Dandy system was designed with pistol and select small-caliber rifle reloading in mind, which makes it a favorite for folks loading rounds like 9mm, 38 Special, 45 ACP, and similar cartridges where the same charge gets thrown over and over. The #3 is one of 28 interchangeable fixed charge rotors in the lineup, and between all the rotor sizes and the range of powders out there, the family covers somewhere around 400 different loading combinations. Each rotor is machined from steel, so it holds its dimensions and keeps throwing the same volume load after load.
Running the Little Dandy Powder Rotor #3
One of the best parts of this setup is how little fuss it takes. Once you swap a rotor in, there's no readjustment, the charge is already fixed by the rotor's cavity. You can run the Little Dandy measure by hand for quick batch work or mount it to your bench using an RCBS powder measure stand for steadier, higher-volume sessions. It works with smokeless powders and is a genuinely fast way to get consistent charges when you're loading the same recipe in bulk.
If you already run a Little Dandy measure and your load calls for the #3, this is a simple, durable piece that earns its spot on the bench.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number (MPN): 86003
- UPC: 076683860033
- Rotor Size: #3
- Type: Fixed Charge Interchangeable Powder Rotor
- Material: Machined Steel
- Metering Method: Volume
- Compatibility: RCBS Little Dandy Powder Measure
- Powder Type: Smokeless Powders
- Intended Use: Handgun and Small-Caliber Rifle Loads
- Country of Origin: USA
- Shipping Weight: 0.3 lbs
What’s Included
- RCBS Little Dandy Powder Rotor #3 (86003)
Frequently Asked Questions
What does the RCBS Little Dandy Powder Rotor #3 do?
It's a fixed charge rotor that drops a consistent powder charge by volume when installed in the RCBS Little Dandy Powder Measure. Each rotor has a set cavity, so once it's in place there's no readjusting. The #3 is one of 28 interchangeable rotor sizes in the Little Dandy family.
How many grains will the #3 rotor throw?
Because it meters by volume, the actual grain weight depends on the specific powder you're using, since different powders have different densities. RCBS publishes a rotor charge chart that lists the charge weights each rotor throws with various powders. Check that chart against your recipe to confirm the #3 is the right rotor for your load.
Do I need the Little Dandy Powder Measure to use this rotor?
Yes. This is a replacement or add-on rotor designed specifically for the RCBS Little Dandy Powder Measure, which is sold separately. The rotor won't function on its own, it drops into the measure to set the charge volume.
Can the Little Dandy be used on a reloading bench?
It can. You can run the Little Dandy measure by hand for quick work or mount it to your bench with an RCBS powder measure stand for more stable, higher-volume loading. It's a flexible setup whether you load a little or a lot.




Reviews
There are no reviews yet.