Description
Finding factory ammo for the 8x58R Danish Krag is a tough hunt these days, which makes a quality die set less of a luxury and more of a requirement if you want to keep your Krag-Jørgensen or Danish rolling block shooting. This RCBS set is a two-die arrangement built specifically for that rimmed, bottleneck cartridge, so you get the right tooling instead of trying to fudge dimensions with something close.
The set pairs a Full-Length Sizer Die with an Expander-Decapping Unit and a Seater Die that carries a bullet seater plug. The sizer works the whole case body back down to SAAMI minimum dimensions, which is exactly what you want when you're running fired or reformed brass through a rifle that may have a slightly generous chamber. Headspace is held tight so the die isn't pushing the shoulder around more than it needs to, and the seater has a built-in roll crimper that locks the bullet while it seats in the same stroke.
Why the RCBS 8x58R Danish Krag Die Set Earns Its Keep
These dies are machined from RCBS proprietary die steel and finished to tight tolerances, which is the kind of thing you notice when the brass glides instead of fighting you. They run the standard 7/8"-14 thread, so they'll thread right into any common single-stage or turret press without an adapter. The Krag uses a .323-inch bullet, the same diameter as 8mm Mauser projectiles, so component selection is easier than the cartridge's rarity might suggest.
Getting the Most From Your Danish Krag Dies
A lot of folks feeding this old warhorse are forming brass from other cases or reviving surplus hulls, so good lube and proper annealing go a long way. Pair these dies with a compatible shell holder, quality .323 bullets, and fresh or reformed brass and you've got everything you need to roll your own for a rifle that otherwise sits in the safe for lack of ammo. For the Krag crowd, this is the straightforward path back to the range.
Key Specifications
- Manufacturer: RCBS
- Caliber: 8x58R Danish Krag (8mmx58R)
- Die Type: Full-Length 2-Die Set
- Set Contents: Full-Length Sizer Die and Seater Die
- Sizer Features: Expander-Decapping Unit
- Seater Features: Bullet Seater Plug with built-in roll crimper
- Thread: Standard 7/8"-14
- Material: RCBS proprietary die steel
- Bullet Diameter: .323 in (8.2 mm)
- Case Type: Rimmed, bottleneck
- Manufacturer Part Number: 56371
- Model: 56371
- UPC: 076683563712
- Country of Origin: USA
What’s Included
- Full-Length Sizer Die with Expander-Decapping Unit
- Seater Die with Bullet Seater Plug and built-in roll crimper
Frequently Asked Questions
What comes in the RCBS 8x58R Danish Krag die set?
This is a two-die set that includes a Full-Length Sizer Die fitted with an Expander-Decapping Unit and a Seater Die with a bullet seater plug. The sizer resizes the whole case and knocks out the spent primer in one motion, while the seater places the bullet and applies a roll crimp at the same time. A shell holder is sold separately.
What bullet diameter does the 8x58R Danish Krag use?
The 8x58R Danish Krag runs a .323-inch (8.2 mm) bullet, the same diameter used by 8mm Mauser. That overlap makes sourcing projectiles a lot easier than you'd expect for such an uncommon cartridge. Just be careful not to confuse it with the 8x56R, which uses a larger .329-inch bullet.
Will these RCBS dies fit my press?
Yes. The set uses the standard 7/8"-14 thread, so it threads into virtually any common single-stage or turret reloading press without an adapter. You'll just need the correct shell holder for the Danish Krag's rim.
Can I form brass for the Danish Krag with this set?
These are standard full-length reloading dies, not case-forming dies, so they're meant for sizing and seating once you have brass in the right basic shape. Many reloaders use reformed or trimmed parent brass along with proper lube and annealing before running it through the sizer. If you're starting from a very different parent case, a dedicated case-forming die set is the better first step.




Reviews
There are no reviews yet.