Description
If you're loading 6.5 PRC and want dies that do the job right without draining the wallet, RCBS's Full-Length Die Set is a solid pick. This is a two-die set built for bottleneck brass, pairing a full-length sizer die with an expander-decapping unit and a seater die with a bullet seater plug. The sizer brings your fired cases back to SAAMI minimum dimensions, de-primes, and expands the neck in one pull of the press handle, while the seater locks in your bullet depth. Both dies use the standard 7/8"-14 thread, so they'll thread into just about any single-stage or progressive press you've got on the bench.
What the 6.5 PRC Die Set Brings to the Bench
RCBS machines these from their own proprietary die steel, then hardens and finishes the interior to tight tolerances. The full-length sizer is vented, which keeps trapped air and excess case lube from denting shoulders during sizing. Headspace is held to minimum tolerances so the case body length stays put, and that consistency is what keeps rounds chambering smooth and grouping tight downrange.
Seating and Crimping with the RCBS 6.5 PRC Set
The seater die has a built-in roll crimp. You can crimp and seat in the same stroke, or back the die off until the crimp ring clears the case mouth to seat without any crimp at all. That flexibility matters on a cartridge like the 6.5 PRC, where a lot of handloaders chasing accuracy skip the crimp entirely and let neck tension do the work.
A Dependable Starting Point for 6.5 PRC Handloads
The 6.5 PRC has earned its reputation as a flat-shooting, hard-hitting long-range round, and feeding it quality handloads is where a good die set pays off. This set covers the essentials to turn once-fired brass into accurate ammo. Keep in mind the shell holder is sold separately, so grab the correct one for the 6.5 PRC case head if you don't already have it on hand. Everything arrives in RCBS's familiar green storage box to keep the dies organized and protected between sessions.
Key Specifications
- Manufacturer: RCBS
- Model: Full-Length Die Set (Group D)
- Manufacturer Part Number: 32101
- UPC: 604544628401
- Caliber: 6.5 PRC
- Die Type: Full-Length Sizer, Bullet Seater
- Number of Dies: 2
- Thread Size: 7/8"-14
- Material: Proprietary Hardened Die Steel
- Carbide: No
- Crimp Type: Built-in Roll Crimp (optional)
- Shell Holder: Sold Separately
- Country of Origin: USA
What’s Included
- Full-Length Sizer Die with Expander-Decapping Unit
- Seater Die with Bullet Seater Plug and built-in roll crimper
- Green RCBS die storage box
Frequently Asked Questions
Does the RCBS 6.5 PRC die set come with a shell holder?
No, the shell holder is sold separately with this set. You'll need the correct RCBS shell holder sized for the 6.5 PRC case head before you can run brass through the dies. It's a quick, inexpensive add-on, so grab one when you order if you don't already have the right size on the bench.
Will these dies fit my reloading press?
Yes. Both dies use the industry-standard 7/8"-14 thread, which fits nearly every single-stage and progressive press on the market, including RCBS, Hornady, Lee, and Dillon. Just thread them in and set your sizing and seating depth.
Can I seat bullets without crimping using this RCBS set?
Absolutely. The seater die has a built-in roll crimp, but you can back the die body off until the crimp ring no longer contacts the case mouth, letting you seat with zero crimp. Many 6.5 PRC handloaders chasing precision skip the crimp and rely on neck tension instead.
What does the full-length sizer die actually do to the case?
The full-length sizer resizes the entire outside of the case back down to SAAMI minimum dimensions, de-primes the spent primer, and expands the neck to accept a new bullet, all in one stroke. The die is vented to prevent trapped air or excess lube from denting the case shoulder. Headspace is held to minimum tolerances so your reloads chamber consistently.



Reviews
There are no reviews yet.