Description
The .30R Blaser isn't a cartridge you'll find on every ammo shelf, which is exactly why owning a quality die set matters. This Group G set from RCBS covers the rimmed 7.62x68mmR bottleneck case and gives handloaders a dependable way to keep their break-action, double, or single-shot rifle fed with tailored loads. It's a special-order caliber done right, machined to the same standards RCBS applies across its full-length line.
The set includes two dies. The full-length sizer carries an expander-decapping unit that resizes the outside of the case, knocks out the spent primer, and opens the neck back up to accept a new bullet. It brings brass back to SAAMI minimum dimensions for reliable chambering, and vents in the die body let trapped air and excess lube escape so your cases don't get dented or dimpled during sizing. Headspace is held to tight tolerances to keep the case body length consistent run after run.
What the .30R Blaser Die Set Brings to the Bench
The second die is the bullet seater, which comes with a seater plug and a built-in roll crimper. That lets you seat and crimp in one motion if you want the extra bullet grip, handy for the heavier .308-diameter bullets this cartridge tends to run, typically in the 150 to 180 grain range for European and North American big game.
Fitting the RCBS .30R Blaser Set to Your Press
These dies use the industry-standard 7/8-14 thread, so they'll thread into nearly any single-stage or progressive press, whether it's an RCBS, Hornady, Lee, Lyman, Redding, or Dillon. The set ships in the familiar green RCBS box and is made in the USA. Keep in mind the shell holder is sold separately, so grab the correct one for the .30R Blaser rim if you don't already have it on the bench.
For anyone chambered in this niche rimmed .30 caliber, a set like this turns hard-to-source ammo into a non-issue and gives you full control over your loads.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 56289
- UPC: 076683562890
- Caliber: .30R Blaser (7.62x68mmR)
- Die Group: Group G
- Type: Full-Length 2-Die Set
- Case Type: Rimmed, Bottleneck
- Thread: Standard 7/8-14
- Material: Proprietary Die Steel
- Gun Type: Rifle
- Country of Origin: USA
- Shipping Weight: 1.35 lbs
What’s Included
- Full-Length Sizer Die with Expander-Decapping Unit
- Seater Die with Bullet Seater Plug and built-in roll crimper
- Green RCBS die box
Frequently Asked Questions
What dies come in the RCBS .30R Blaser Group G set?
You get two dies. The first is a full-length sizer with an expander-decapping unit that resizes the case, removes the old primer, and expands the neck. The second is a bullet seater die with a seater plug and a built-in roll crimper for seating and crimping in one stroke.
Do I need a shell holder with this set?
Yes, the shell holder is sold separately and is not included in the box. Make sure you pick up the correct shell holder sized for the .30R Blaser rim so you can get your brass seated properly on the press ram.
Will these dies fit my press if it isn't an RCBS?
They will. The set uses the industry-standard 7/8-14 thread, which fits nearly all single-stage and progressive presses from brands like Hornady, Lee, Lyman, Redding, and Dillon. That standard is universal across the reloading world, so you're covered on just about any bench.
What is the .30R Blaser used for?
The .30R Blaser is a rimmed, bottlenecked .30 caliber cartridge developed for hunting, firing standard .308-diameter bullets. Its rimmed design makes it a natural fit for break-action rifles, drillings, and single-shot guns, and it delivers performance in the neighborhood of the .30-06 for big game.





Reviews
There are no reviews yet.