0
0

RCBS Full Length 2-Die Set Group D 6.5×57 Mauser (32801)

UPC: 076683328014

$96.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The RCBS Full Length 2-Die Set in 6.5×57 Mauser is the classic two-die combination handloaders have relied on for decades. This Group D set covers the two core jobs for bottleneck rifle brass: sizing and seating. The full-length sizer die works the outside of the case, knocks out the spent primer, and expands the neck back to spec so it will accept a new bullet. The seater die then places the bullet to your chosen depth and applies a roll crimp to hold it in place. It is a straightforward, dependable setup for anyone loading the 6.5×57.

What the 6.5×57 Die Set Does on the Press

The sizer brings fired cases down to SAAMI minimum cartridge dimensions, which keeps your loaded rounds chambering smoothly across rifles. Headspace is held to minimum tolerances so the case body length stays consistent through the full-length sizing stroke. Vent holes in the die let trapped air and excess case lube escape, which helps prevent dented or crushed shoulders during sizing. The die body uses the standard 7/8-14 thread, so it threads right into any common single stage, turret, or progressive press.

Build Quality Behind the RCBS Group D Set

RCBS machines these dies from their proprietary die steel to tight tolerances, then runs them through a careful finishing process. That is the reason these dies have such a long reputation for smooth operation and consistent results load after load. The seater die includes a bullet seater plug and offers the adjustment you need to fine-tune seating depth during load development.

Getting Set Up With Your 6.5×57 Dies

Keep in mind this is a 2-die set, so a shell holder is not included and will need to be matched to the 6.5×57 case head and picked up separately. The dies ship in the familiar RCBS green die box, which doubles as storage between sessions. Whether you are feeding a sporterized Mauser or a modern bolt gun chambered for the cartridge, this set gives you everything on the die side to turn fired brass into quality handloads.

Key Specifications

  • Manufacturer: RCBS
  • Caliber: 6.5×57 Mauser
  • Die Group: Group D
  • Set Type: Full Length 2-Die Set
  • Case Type: Bottleneck Rifle
  • Thread: Standard 7/8-14
  • Material: Proprietary Die Steel
  • Crimp Type: Built-in Roll Crimp
  • Country of Origin: Made in USA
  • Manufacturer Part Number: 32801
  • UPC: 076683328014

What’s Included

  • Full-Length Sizer Die with Expander-Decapping Unit
  • Seater Die with Bullet Seater Plug and built-in roll crimper
  • RCBS green die storage box

Frequently Asked Questions

Does the RCBS 6.5×57 die set come with a shell holder?

No, this is a 2-die set and a shell holder is not included. RCBS, like most die makers, sells shell holders separately so you can match the correct one to the 6.5×57 case head. You will want to pick one up before your first loading session.

What does each die in this Group D set do?

The full-length sizer die resizes the outside of the fired case, removes the spent primer, and expands the neck to accept a new bullet. The seater die then seats the bullet to your chosen depth and applies a roll crimp to secure it. Together they handle the two main steps of reloading bottleneck brass.

Will these dies fit my press?

Yes, the die bodies use the standard 7/8-14 thread, which is the common size for single stage, turret, and progressive reloading presses. If your press accepts standard dies, this set will thread right in.

What is the difference between Group A and Group D dies?

Both are full-length 2-die sets that perform the same basic sizing and seating functions. The group designation simply refers to how RCBS organizes cartridges, with each caliber assigned to a specific group. For the 6.5×57 Mauser you want this Group D set, part number 32801.

Additional information

UPC

076683328014

Manufacturer

Manufacturer Part Number

32801

Shipping Weight

1.3063

Reviews

There are no reviews yet.

Be the first to review “RCBS Full Length 2-Die Set Group D 6.5×57 Mauser (32801)”