Description
The .460 Weatherby Magnum is one of the biggest sticks in the safari rifle world, a belted, double-radius-shouldered round built to launch 500-grain bullets at dangerous-game velocity. Brass and loaded ammo for it don't exactly fall out of the sky, so if you run a .460, reloading isn't a hobby, it's a necessity. This RCBS Group D set gives you the two dies you need to keep that rifle fed.
You get a Full-Length Sizer Die with an Expander-Decapping Unit and a Seater Die with a Bullet Seater Plug. The sizer brings the case back to SAAMI minimum dimensions, works the outside of the brass, knocks out the spent primer, and opens the neck up to take the next bullet. It's vented so trapped air and extra case lube don't dent or buckle your brass on the downstroke, and headspace is held tight so the case body length stays where it should during full-length sizing. The seater die has a built-in roll crimper that sets the bullet and crimps it in one motion, which is exactly what you want on a hard-recoiling magnum where bullets can creep under the pounding.
What the .460 Wby Die Set Is Made From
RCBS machines these from their proprietary die steel to tight tolerances, then runs them through a finishing process before they ever leave the factory. Every set gets hand inspected, and they ship in the familiar green RCBS die box. That reputation for consistency is a big reason handloaders keep coming back to the brand.
Fitting the Group D Set to Your Press
These dies use the industry-standard 7/8"-14 thread, so they'll thread into nearly any single-stage or turret press from RCBS, Hornady, Lyman, and most others on the market. One thing to know up front: the shell holder is not included. The .460 Weatherby Magnum runs the RCBS #14 shell holder, which you'll want to grab separately if you don't already have one on the bench.
Key Specifications
- Brand: RCBS
- Caliber: .460 Weatherby Magnum
- Die Group: Group D
- Set Type: Full-Length 2-Die Set
- Case Type: Bottleneck
- Thread: 7/8"-14 (industry standard)
- Die Material: RCBS Proprietary Die Steel
- Compatible Shell Holder: RCBS #14 (sold separately)
- Manufacturer Part Number (MPN): 33101
- Model: 33101
- UPC: 076683331014
What’s Included
- Full-Length Sizer Die with Expander-Decapping Unit
- Seater Die with Bullet Seater Plug and built-in roll crimper
- RCBS green die storage box
Frequently Asked Questions
Does this RCBS .460 Weatherby Magnum die set come with a shell holder?
No, the shell holder is not part of the set. The .460 Weatherby Magnum uses the RCBS #14 shell holder, which also fits cartridges like the .30-378 and .378 Weatherby Magnum and the .45-70 Government. You'll need to purchase it separately if it's not already in your kit.
Will these dies fit a press other than an RCBS?
Yes. The set uses the industry-standard 7/8"-14 thread, so it threads into nearly every single-stage and turret press on the market, including Hornady, Lyman, and Lee. As long as your press takes standard dies, you're good to go.
What does the Full-Length Sizer Die actually do?
It sizes the outside of the case back down to SAAMI minimum dimensions, de-primes the spent case, and expands the neck so it'll accept a new bullet. It's vented to keep trapped air and excess lube from damaging your brass, and headspace is held tight so the case body length doesn't shift during sizing.
Does the seater die crimp the bullet too?
Yes, the Bullet Seating Die has a built-in roll crimper, so it seats the bullet and crimps it in the same stroke. That crimp is worth having on a heavy-recoiling round like the .460 Weatherby, where it helps keep bullets from working loose under recoil.




Reviews
There are no reviews yet.