Description
The .348 Winchester is a classic, and if you shoot a Winchester Model 71 or a single-shot chambered for it, finding factory ammo gets old fast. That is exactly where this RCBS Full-Length 2-Die Set Group D earns its keep. It gives you everything you need to work bottleneck .348 brass from fired case to finished round, so you can keep that old lever gun fed on your own terms.
What the RCBS .348 Win Die Set Does
The set includes a Full-Length Sizer Die paired with an Expander-Decapping Unit, plus a Seater Die with a Bullet Seater Plug. The sizer brings fired cases back down to SAAMI minimum dimensions while the decapping pin punches the spent primer, and the expander opens the neck to proper tension for your next bullet. Vents in the sizer let trapped air and excess case lube escape, which keeps your brass from getting dented or hydraulically bulged during the stroke. Headspace is held to tight tolerances so the case body length stays put through full-length sizing.
Seating and Crimping with the .348 Win Seater Die
The seater die handles bullet seating and includes a built-in roll crimp, which is a nice touch for a cartridge that often runs through tubular magazines where you want the bullet locked in place. You can adjust seating depth to tune your overall length and dial the crimp to suit your load.
Fitting the Group D Two-Die Set to Your Press
These dies use the standard 7/8-14 thread, so they thread right into any common single-stage or turret press. They are machined from RCBS proprietary die steel for a long service life. Keep in mind a shell holder is not included, so you will want to grab the correct one for the .348 Winchester case head before your first session.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 33601
- UPC: 076683336019
- Caliber: .348 Winchester
- Die Set Type: Full-Length 2-Die Set (Group D)
- Cartridge Style: Bottleneck Rifle
- Number of Dies: 2
- Thread: 7/8-14
- Material: Proprietary Die Steel
- Sizing: Full-length to SAAMI minimum dimensions
- Crimp: Built-in roll crimp in seater die
- Shipping Weight: 1.2125 lbs
What’s Included
- Full-Length Sizer Die with Expander-Decapping Unit
- Seater Die with Bullet Seater Plug
- Instructions
Frequently Asked Questions
Does the RCBS .348 Win die set come with a shell holder?
No, a shell holder is not included with this two-die set. You will need to purchase the correct one separately for the .348 Winchester case head. The RCBS shell holder commonly listed for the .348 Winchester is the number 5.
Will these dies work in my reloading press?
Yes, the set uses the standard 7/8-14 thread found on the vast majority of single-stage and turret presses. As long as your press takes standard threaded dies, these will thread right in with no adapters needed.
Can the seater die crimp my .348 Winchester loads?
Yes, the seater die has a built-in roll crimp, which is handy since many .348 Winchester rifles like the Model 71 use a tubular magazine. A good roll crimp helps keep bullets seated under recoil and feeding pressure. You can adjust the crimp and seating depth independently to tune your load.
What rifles is the .348 Winchester used in?
The .348 Winchester was introduced in 1936 and developed for the Winchester Model 71 lever-action rifle. Over the years it has also been chambered in a limited run of single-shot rifles. Since factory ammo can be scarce and pricey, loading your own with this die set is the practical way to keep shooting one.



Reviews
There are no reviews yet.