0
0

RCBS Full Length 2-Die Set .26 Nosler – 26501 Rifle Reloading Dies

UPC: 076683265012

$96.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're feeding a .26 Nosler and want control over every round, this is the set that gets you there. RCBS has been turning out reloading gear for over 60 years, and this two-die group handles the heart of the job: full-length sizing and bullet seating for that big, overbore 6.5mm case. The sizer die brings fired brass back to SAAMI minimum dimensions, deprimes the spent primer, and expands the neck in one stroke, while vent holes let trapped air and excess lube escape so your cases don't get dinged up.

What the RCBS .26 Nosler Die Set Brings to the Bench

The set includes a Full-Length Sizer Die with an expander-decapping unit and a Seater Die with a bullet seater plug and built-in roll crimper. Headspace is held to tight tolerances to keep the case body from stretching during sizing, which matters a lot on a case this size. Both dies are machined from RCBS proprietary die steel and use the standard 7/8"-14 thread, so they fit nearly every press on the market including RCBS, Hornady, Lee, and others.

Why Handloading the .26 Nosler Pays Off

The .26 Nosler is a non-belted, rebated-rim 6.5mm cartridge that was billed as the fastest commercial 6.5 when it launched, pushing a 129-grain bullet somewhere around 3,400 fps. It runs in a standard 30-06 length action and loves high-BC .264 projectiles, which gives it a famously flat trajectory out past 400 yards. That big overbore case eats powder and can be hard on barrels, so building your own loads lets you dial in a recipe that balances velocity and barrel life the way you want it.

There's plenty of great 6.5mm component brass and bullets out there, and Nosler makes quality prepped cases for this one. Pair this set with a shell holder, which is sold separately, and you've got the foundation for turning out consistent .26 Nosler ammo at home. Everything stows in the included plastic storage case so it stays organized on the shelf between sessions.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number: 26501
  • UPC: 076683265012
  • Caliber: .26 Nosler
  • Product Type: Full Length
  • Number of Dies: 2
  • Die Type: 7/8"-14 Thread
  • Material: Proprietary Die Steel
  • Case Type: Bottleneck Rifle
  • Storage: Plastic Die Box
  • Made In: USA

What’s Included

  • Full-Length Sizer Die with Expander-Decapping Unit
  • Seater Die with Bullet Seater Plug and Roll Crimper
  • Plastic storage case

Frequently Asked Questions

Does the RCBS .26 Nosler die set include a shell holder?

No, the shell holder is sold separately. The .26 Nosler uses the same shell holder as other cartridges on that rebated rim, so check your RCBS shell holder chart before your first session. Adding the correct one rounds out everything you need to start loading.

Will these dies fit my press if it isn't an RCBS press?

Yes. These dies use the industry-standard 7/8"-14 thread, which fits nearly all single-stage and progressive presses, including Hornady, Lee, Lyman, and others. You don't need an RCBS press to run them.

What does this full-length die set do to the brass?

The sizer die brings your fired .26 Nosler cases back to SAAMI minimum dimensions, deprimes the spent primer, and expands the neck to accept a new bullet, all in one stroke. The seater die then seats the bullet and applies a roll crimp. Vent holes in the sizer let trapped air and excess lube escape so cases aren't damaged during sizing.

Is the .26 Nosler worth handloading for?

For a lot of folks, yes. The .26 Nosler is an overbore 6.5mm magnum that burns a large powder charge, and rolling your own lets you tailor loads to your rifle and get the most out of that big case. It also pairs well with the wide selection of quality 6.5mm bullets and Nosler component brass available.

Additional information

UPC

076683265012

Manufacturer

Manufacturer Part Number

26501

Caliber/Gauge

.26 Nosler

Length

5.9500

Product Type

FULL LENGTH

Shipping Weight

1.2625

Reviews

There are no reviews yet.

Be the first to review “RCBS Full Length 2-Die Set .26 Nosler – 26501 Rifle Reloading Dies”