0
0

RCBS Full Length Die Set .17 Hornet – 2-Die Group D Set (21801)

UPC: 076683218018

$96.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The RCBS Full Length Die Set for .17 Hornet is a two-die set made for folks who want to roll their own .17 Hornet rounds and get the kind of consistency that factory ammo in this little caliber can struggle to deliver. You get a Full-Length Sizer Die paired with an Expander-Decapping Unit, plus a Seater Die with a bullet seater plug. Together they cover the two jobs that matter most: bringing fired brass back into spec and seating your bullet exactly where you want it.

How the .17 Hornet Die Set Works at the Press

The full-length sizer brings your cases down to SAAMI minimum cartridge dimensions, sizing the outside of the case, knocking out the spent primer, and expanding the neck to accept the next bullet. RCBS vents the sizer die so trapped air and excess case lube don't dent or buckle your brass, which is a real concern when you're working with a case this small and thin. Headspace is held to tight tolerances to keep the case body length consistent through sizing, so your rounds chamber the same way every time.

Seating and Crimping with the RCBS .17 Hornet Set

The seater die uses a bullet seater plug for clean, repeatable seating depth, and it has a built-in roll crimper if you want to lock the bullet in place as it's seated. For a varmint and small-game round like the .17 Hornet, that repeatability is what turns a box of handloads into a tight group on paper or a clean hit on a distant prairie dog.

What Makes These RCBS Dies a Solid Choice

Both dies are cut from RCBS proprietary die steel and use the standard 7/8"-14 thread, so they drop right into any standard single-stage or turret press from RCBS, Lee, Hornady, Lyman, and the rest. This is a Group D set and ships in the familiar green RCBS die box. You'll want RCBS shell holder #12 to run these on your press, and that sells separately. If you already load other calibers, this set slots right into your routine with no fuss.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number: 21801
  • UPC: 076683218018
  • Caliber: .17 Hornet
  • Product Type: Full Length Die Set
  • Die Group: Group D
  • Number of Dies: 2
  • Thread Size: 7/8"-14 Standard
  • Die Material: RCBS Proprietary Die Steel
  • Carbide: No
  • Recommended Shell Holder: RCBS #12 (sold separately)

What’s Included

  • Full-Length Sizer Die with Expander-Decapping Unit
  • Seater Die with bullet seater plug and built-in roll crimper
  • RCBS green die box

Frequently Asked Questions

What shell holder do I need for the RCBS .17 Hornet die set?

On an RCBS press you'll want the RCBS #12 shell holder for the .17 Hornet, which fits the 22 Hornet and 22 K-Hornet as well. Keep in mind RCBS shell holder numbers don't match other brands, so if you're running Hornady it's a #3 and Lee uses a #20. The shell holder is not included with this die set and needs to be purchased separately.

Will these RCBS dies fit my press?

Yes. Both dies use the industry-standard 7/8"-14 thread, so they'll thread right into any standard single-stage or turret press, including RCBS, Lee, Hornady, and Lyman. If your press takes standard dies, you're good to go.

Does the RCBS .17 Hornet die set crimp the bullet?

It can. The seater die has a built-in roll crimper that secures the bullet at the same time the round is seated. You can set it up to crimp or back it off and just seat without crimping, depending on how your loads shoot best.

Does this set size the full case or just the neck?

This is a full-length sizing set, so it resizes the entire case body back to SAAMI minimum dimensions rather than just the neck. Full-length sizing is the way to go if you want reliable chambering across different rifles or if you're loading brass that's been fired in more than one gun. The sizer also de-primes and expands the neck in one stroke.

Additional information

UPC

076683218018

Manufacturer

Manufacturer Part Number

21801

Caliber/Gauge

.17 Hornet

Length

6

Product Type

FULL LENGTH

Shipping Weight

1.0875

Reviews

There are no reviews yet.

Be the first to review “RCBS Full Length Die Set .17 Hornet – 2-Die Group D Set (21801)”