Description
If you're loading for an 8mm Mauser and want brass that chambers clean every time, this RCBS full-length two-die set covers the two jobs that matter most: resizing fired cases and seating bullets. It's a straightforward, no-nonsense setup built for bottleneck rifle cases, and it carries the reputation RCBS has earned over decades of sitting on reloading benches.
The first die is a full-length sizer with an expander-decapping unit. It works the outside of the case down to SAAMI minimum dimensions, knocks out the spent primer, and expands the neck so it's ready to take a bullet. The die is vented, which keeps trapped air and excess lube from denting or buckling your brass during the stroke. RCBS also holds headspace to minimum tolerances so the case body length stays put through full-length sizing, which is a big part of why these loads feed so reliably.
What the RCBS 8×57 Mauser Die Set Brings to the Bench
The second die is the seater, and it comes with a bullet seater plug plus a built-in roll crimp. You can crimp and seat in one motion, or back the crimp off and seat without one, depending on how you like your loads. The dies run standard 7/8-14 threads, so they'll thread right into just about any single-stage or turret press you already own. A plastic storage box, instruction sheet, and load data table round out the package.
Pairing Up Your RCBS 8mm Mauser Dies
Keep in mind the 8×57 Mauser uses a .323 diameter bullet, and this set is cut for that. You'll need an RCBS #3 shell holder to run these dies, and it's sold separately. Reloaders who have run RCBS for years tend to stick with them for a reason: the tooling lasts, the results stay consistent, and the company's lifetime warranty has your back if anything ever goes sideways.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number (MPN): 15901
- UPC: 076683159014
- Caliber: 8×57 Mauser (8mm Mauser)
- Bullet Diameter: .323 in
- Die Type: Full Length, 2-Die Set
- Thread Size: 7/8-14
- Material: Hardened steel
- Shell Holder: RCBS #3 (sold separately)
- Case Type: Bottleneck rifle
What’s Included
- Full-length sizer die with expander-decapping unit
- Seater die with bullet seater plug and built-in roll crimp
- Plastic storage box
- Instruction sheet
- Load data table
Frequently Asked Questions
What shell holder do I need for the RCBS 8×57 Mauser die set?
This set uses an RCBS #3 shell holder, which fits the 8×57 Mauser case head. It's sold separately and is not included in the box. The #3 also covers a handful of other popular cartridges like 30-06 and 308 Winchester, so you may already have one on your bench.
Will these RCBS dies fit my press?
Yes. The dies are cut with standard 7/8-14 threads, so they'll thread into any single-stage or turret press that accepts that common size. They also play nice with Hornady Lock-N-Load bushing systems if that's how your press is set up.
Can I seat bullets without crimping with this set?
You can. The seater die has a built-in roll crimp, but you can back it off and seat bullets with no crimp at all if you prefer. That flexibility lets you tailor your loads for accuracy or for feeding, whichever matters more to you.
What bullet diameter does the RCBS 8×57 Mauser set use?
This set is built for the .323 diameter bullets that the 8×57 JS (8mm Mauser) chambers. Make sure your bullets are .323 and not the older .318 so everything sizes and seats correctly.




Reviews
There are no reviews yet.