0
0

RCBS Full-Length 2-Die Set 7.5×55 Schmidt-Rubin Swiss – 33501

UPC: 076683335012

$51.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The 7.5×55 Schmidt-Rubin, often called the 7.5 Swiss, is one of those great old military rounds that is a joy to reload, and factory ammo can be tough to track down. This RCBS Group A full-length 2-die set gives you everything you need to turn once-fired brass into fresh, accurate loads for your K31 or other Swiss service rifle. It is cut specifically for the 7.5×55 case, so you are not fighting mismatched dimensions or guesswork.

The set pairs a full-length sizer die with an expander-decapping unit and a seater die with a bullet seater plug. The sizer brings your brass back down to SAAMI minimum cartridge dimensions, sizing the outside of the case, knocking out the spent primer, and expanding the neck to accept the next projectile in one stroke. Vents in the die let out trapped air and excess lube, which keeps your cases from getting dented during the sizing process. Headspace is held to tight tolerances, so the body length of the case stays consistent run after run.

What the 7.5×55 Schmidt-Rubin Die Set Brings to the Bench

Both dies are machined from RCBS proprietary die steel and go through a careful finishing process, which is a big part of why these hold up for decades of loading. The seater die includes a built-in roll crimper that secures the bullet at the same time it is seated, handy for a battle rifle that benefits from a good crimp. These use the standard 7/8-14 thread, so they drop right into nearly any single stage or progressive press from RCBS, Hornady, Lyman, Lee, and the rest.

Setting Up the Schmidt-Rubin 33501 Die Set

You will want a #2 shell holder to run this caliber, which is sold separately. Beyond that, a press, some lube, and your 7.5×55 brass and you are off to the races. RCBS dies are made in the USA, hand inspected before they ship, and backed by a long-standing reputation that keeps reloaders coming back.

Key Specifications

  • Manufacturer: RCBS
  • Caliber: 7.5x55mm Schmidt-Rubin (7.5×55 Swiss)
  • Die Set Type: Full-Length 2-Die Set
  • Manufacturer Part Number: 33501
  • UPC: 076683335012
  • Thread: Standard 7/8-14
  • Die Material: Proprietary Die Steel
  • Shell Holder Required: #2 (sold separately)
  • Case Type: Bottleneck Rifle
  • Made In: USA
  • Shipping Weight: 1.25 lbs

What’s Included

  • Full-Length Sizer Die with Expander-Decapping Unit
  • Seater Die with Bullet Seater Plug
  • Green RCBS die storage box

Frequently Asked Questions

Which shell holder do I need for the RCBS 7.5×55 Schmidt-Rubin die set?

This caliber uses the RCBS #2 shell holder. It is not included with the die set, so you will want to grab one separately if you do not already have it on the bench. The shell holder fits into your press ram and holds the case while the dies do their work.

Will these dies fit my non-RCBS press?

Yes. The set uses the industry standard 7/8-14 thread, which fits nearly all single stage and progressive presses from RCBS, Hornady, Lyman, Lee, and most other major makers. You will not need any special adapter to run them.

Does this die set work for both 7.5×55 Swiss and K31 rifles?

It does. The 7.5×55 Schmidt-Rubin and 7.5×55 Swiss are the same cartridge, which is what the K31 and earlier Schmidt-Rubin rifles are chambered for. This set is cut specifically for that case, so it covers all of those rifles.

Does the seater die crimp the bullet?

Yes, the seater die has a built-in roll crimper that secures the bullet at the same time it seats it. You can dial in the crimp to your liking, or back it off if you prefer to seat without crimping. A good crimp is a nice touch for a semi-auto or hard-recoiling service rifle.

Additional information

UPC

076683335012

Manufacturer

Manufacturer Part Number

33501

Shipping Weight

1.25

Reviews

There are no reviews yet.

Be the first to review “RCBS Full-Length 2-Die Set 7.5×55 Schmidt-Rubin Swiss – 33501”