Description
The 6.5×55 Swedish Mauser is one of those old-world cartridges that just keeps earning its keep, and if you're feeding a Swede or a sporter chambered for it, loading your own brass is the way to get the most out of it. This RCBS Full-Length 2-Die Set is built specifically for that round, giving you everything you need to resize, deprime, and seat without hunting down extra pieces. These are RCBS Precisioneered dies, properly hardened and hand polished, with the lifetime reputation to back them up.
What the RCBS 6.5×55 Die Set Does on the Press
The full-length sizer die works the whole case at once. It brings fired brass back to SAAMI minimum dimensions, sizes the outside of the case body, pushes out the spent primer with the expander-decapping unit, and opens the neck back up to take a fresh bullet. Vent holes built into the die let trapped air and excess lube escape, which keeps you from denting or crushing shoulders during sizing. Headspace is held to minimum tolerance so your case body length stays consistent run after run.
Seating and Crimping with the 2-Die Set
The seater die handles the back half of the job. It includes a bullet seater plug and a built-in roll crimp, so you can seat and crimp in the same step when your load calls for it, or seat without crimping if you'd rather keep those operations separate. That flexibility matters for a cartridge like the 6.5×55 that a lot of folks load for both hunting and target work.
Fit and Compatibility Notes
Both dies use the standard 7/8 x 14 thread, so they'll thread right into any common single-stage or turret press. This set requires RCBS shell holder #2, which is sold separately, so grab one if you don't already have it in your kit. Everything stores in the included plastic case, which keeps your dies clean and organized on the bench between sessions.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 13201
- UPC: 076683132017
- Caliber: 6.5×55 Swedish Mauser
- Product Type: Full-Length 2-Die Set
- Series: Group A
- Die Type: Sizer / Seater
- Dies in Set: 2
- Thread Size: 7/8 x 14
- Shell Holder: RCBS #2 (sold separately)
- Crimp Type: Built-in roll crimp
- Case Design: Bottleneck rifle
What’s Included
- Full-Length Sizer Die with Expander-Decapping Unit
- Seater Die with Bullet Seater Plug and built-in roll crimp
- Instructions
- Warranty card
- Plastic storage case
Frequently Asked Questions
Does the RCBS 6.5×55 die set come with a shell holder?
No, the shell holder is sold separately. This set requires the RCBS shell holder #2 to position your brass in the press. If you're building your 6.5×55 setup from scratch, plan on picking one up alongside the dies.
What's included in this 2-die set?
You get the full-length sizer die with the expander-decapping unit and the seater die with a bullet seater plug and built-in roll crimp. The set also comes with instructions, a warranty card, and a plastic storage case to keep everything together on the bench.
Will these dies fit my reloading press?
Yes. Both dies use the industry standard 7/8 x 14 thread, so they thread into virtually any common single-stage or turret press. That makes them an easy drop-in for just about any standard reloading setup.
Can I seat bullets without crimping with this seater die?
You can. The seater die has a built-in roll crimp, but it's set up so you can seat bullets without applying crimp if that's how you prefer to load. This lets you separate seating and crimping or do both in one pass depending on your load and rifle.



Reviews
There are no reviews yet.