0
0

RCBS Full-Length 2-Die Set .303 British (15401) Group A

UPC: 076683154019

$51.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The RCBS Full-Length Die Set in .303 British is a classic two-die setup built for folks loading their own ammo for the old war-horse Lee-Enfield and other rifles chambered in this rimmed cartridge. This is a Group A set, meaning it covers one of the most popular and widely used calibers out there, and it comes with a full-length sizer die and a bullet seater die. Between the two, you've got everything needed to resize fired brass and seat fresh bullets without buying extras.

The sizing die brings your cases down to SAAMI minimum cartridge dimensions, which means the brass chambers smoothly in just about any .303 rifle on the next go-round. It sizes the outside of the case, knocks out the spent primer, and expands the neck to grab the new bullet, all in one stroke. RCBS vented these sizer dies so trapped air and excess case lube have somewhere to go, which helps you avoid dented shoulders and stuck cases. The .303 British runs on a generous chamber in a lot of surplus rifles, so full-length sizing is the way to go if you're shooting more than one gun or want reliable feeding.

What the RCBS .303 British Die Set Brings to the Bench

Both dies run the standard 7/8-14 thread, so they'll drop straight into any common single-stage or turret press. The seater die has a built-in roll crimper that locks the bullet in place as it's seated, which is handy for a rimmed hunting round that sees some recoil. You can also back the crimp off and just seat if you prefer, giving you flexibility depending on your load.

Made in Oroville, Proven on the Range

RCBS builds these dies from their own proprietary steel and finishes them by hand at their factory in California. That attention shows up in the smooth sizing and the clean brass you pull out of the die. One thing worth noting before you load up: this set uses RCBS shell holder #7, and a shell holder is not included in the box, so grab one if you don't already have it.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number (MPN): 15401
  • UPC: 076683154019
  • Caliber: .303 British
  • Die Type: Full-Length 2-Die Set (Group A)
  • Dies Included: Full-Length Sizer Die, Bullet Seater Die
  • Thread Size: 7/8-14
  • Die Material: Proprietary Steel
  • Shell Holder: RCBS #7 (not included)
  • Crimp: Built-in roll crimp (optional)
  • Case Type: Bottleneck
  • Country of Origin: USA (Oroville, CA)

What’s Included

  • Full-Length Sizer Die with expander-decapping unit
  • Seater Die with bullet seater plug and built-in roll crimper

Frequently Asked Questions

Does the RCBS .303 British die set come with a shell holder?

No, a shell holder is not included with this set. You'll need an RCBS #7 shell holder to use these dies with your press. If you've reloaded other calibers before, there's a good chance you already have one on hand.

Will these dies fit my press?

Yes, both dies use the standard 7/8-14 thread, so they thread right into any common single-stage, turret, or progressive press. That's the industry-standard size, so compatibility is rarely an issue.

What's the difference between full-length sizing and neck sizing for .303 British?

Full-length sizing resizes the entire case body back to SAAMI minimum dimensions, which is the better choice for the .303 British since surplus Lee-Enfield chambers tend to run generous and brass stretches. It ensures reliable chambering across different rifles. Neck sizing only works the neck and is better suited to brass dedicated to a single, tight-chambered rifle.

Can I seat bullets without crimping with this die set?

Yes. The seater die has a built-in roll crimper, but you can back it off and simply seat the bullet without applying a crimp. Just adjust the die up or down in the press depending on whether you want to crimp.

Additional information

UPC

076683154019

Manufacturer

Manufacturer Part Number

15401

Caliber/Gauge

.303 British

Length

6

Product Type

FULL LENGTH

Shipping Weight

1.2563

Reviews

There are no reviews yet.

Be the first to review “RCBS Full-Length 2-Die Set .303 British (15401) Group A”