Description
The RCBS Full Length Die Set for 6mm ARC covers the two jobs that matter most on the reloading bench: bringing your brass back to spec and seating bullets straight. It's a clean, no-nonsense two-die set built for folks loading the 6mm ARC for AR platforms or bolt guns, and it uses the same proprietary die steel and tight machining tolerances RCBS has leaned on for decades. The standard 7/8"-14 thread means it drops right into virtually any single-stage or progressive press, so you're not hunting for adapters or workarounds.
How the 6mm ARC Sizing Die Works
The full-length sizer resizes the whole case back to SAAMI minimum dimensions, de-primes, and runs the neck over an expander ball to set it up for a bullet. Full-length sizing is the way to go for the 6 ARC, especially in semi-autos, because it gives you the body and shoulder clearance you need for smooth, reliable chambering round after round. The die is vented to let trapped air and lube escape, which keeps your cases from getting dented or stuck during the sizing stroke. Headspace is held tight so you're not changing case body length as you work the brass.
Seating Bullets with the RCBS 6mm ARC Die Set
The seater die handles bullet seating and includes a built-in roll crimper if you want to lock the bullet in place during the same stroke. For 6mm ARC fed through a magazine, a little crimp can help guard against bullet setback when rounds slam up the feed ramp. The seater plug is adjustable, so once you dial in your overall length you can run consistent ammo all day.
This set is made in the USA and ships in the familiar green RCBS die box. For anyone building a 6mm ARC load from range brass or fresh components, it's a solid, affordable foundation that pairs well with the right shell holder and a case trimmer.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 28001
- UPC: 604544694031
- Caliber: 6mm ARC
- Die Type: Full-Length 2-Die Set
- Thread: 7/8"-14 Standard
- Die Material: Proprietary Die Steel
- Sizing: Full-Length, SAAMI Minimum Dimensions
- Crimp: Built-In Roll Crimper on Seater Die
- Country of Origin: Made in USA
What’s Included
- Full-Length Sizer Die with Expander-Decapping Unit
- Seater Die with Bullet Seater Plug and roll crimper
- RCBS green die box
Frequently Asked Questions
Is full-length sizing the right choice for 6mm ARC in an AR?
Yes. Full-length sizing resizes the entire case back toward SAAMI minimum dimensions, which gives you the body and shoulder clearance needed for reliable feeding in semi-autos. It's the recommended approach for brass that cycles through an AR platform or gets used across more than one rifle.
Does the RCBS 6mm ARC die set come with a shell holder?
No. This two-die set includes the full-length sizer and the seater die but not a shell holder. You'll want to pair it with the correct shell holder for the 6mm ARC case head so your press can hold the brass during sizing and seating.
Will these dies fit my press?
They should fit just about any standard press. The set uses the common 7/8"-14 thread, which works with single-stage and progressive presses from RCBS, Hornady, Lee, Lyman, Redding, Dillon, and others.
Can I crimp my 6mm ARC rounds with this set?
Yes. The seater die has a built-in roll crimper that can secure the bullet at the same time it's seated. A light crimp can be helpful for magazine-fed 6mm ARC loads to help guard against bullet setback during feeding.




Reviews
There are no reviews yet.