0
0

RCBS Full-Length Die Set .300 Norma Mag – 2 Die Set 31501

UPC: 604544629941

$96.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The .300 Norma Mag earns its reputation at long range, and feeding it quality factory ammo gets expensive fast. This two-die RCBS set lets you take control of your brass and build loads tuned to your rifle. It covers the full reloading cycle for this bottleneck case, from resizing and decapping to seating and crimping, so you can turn fired cases into fresh, repeatable rounds right at your bench.

What the RCBS .300 Norma Mag Die Set Handles

The set pairs a Full-Length Sizer Die with an Expander-Decapping Unit and a Seater Die with a bullet seater plug. The sizing die works the outside of the case back down to SAAMI minimum cartridge dimensions, knocks out the spent primer, and expands the neck so it's ready to accept the next bullet. Headspace is held to tight tolerances so the case body length stays consistent through full-length sizing, which matters a lot when you're chasing accuracy with a cartridge like this.

Built the RCBS Way

These dies are machined from RCBS proprietary die steel and cut to the same exacting standards the company is known for. The sizer die is vented, which lets trapped air and excess case lube escape instead of denting or buckling your brass. The seater die includes a built-in roll crimper, so you can lock the bullet in place at the same moment it's seated, which is handy for magnum loads that see serious recoil. Large, easy-to-adjust hex lock rings make dialing in your settings straightforward.

A Smart Fit for the Long-Range Crowd

Everyone from precision rifle competitors to backcountry hunters runs the .300 Norma, and reloading is often the only practical way to keep it fed. The dies use the standard 7/8"-14 thread, so they'll drop right into any common single-stage or turret press. RCBS tooling has been a bench mainstay for decades, and this set carries that same reliability into a cartridge where consistency pays off downrange. Made in the USA.

Key Specifications

  • Manufacturer: RCBS
  • Caliber: .300 Norma Magnum
  • Die Type: Full-Length, 2-Die Set
  • Dies Included: Full-Length Sizer with Expander-Decapping Unit, Seater Die with Bullet Seater Plug
  • Thread: Standard 7/8"-14
  • Material: Proprietary die steel
  • Crimp Style: Built-in roll crimper in seater die
  • Group: Group D
  • Manufacturer Part Number: 31501
  • UPC: 604544629941
  • Country of Origin: Made in USA
  • Shipping Weight: 1.2 lbs

What’s Included

  • Full-Length Sizer Die with Expander-Decapping Unit
  • Seater Die with bullet seater plug and built-in roll crimper
  • Plastic storage box
  • Loading data table / instructions
  • Warranty card

Frequently Asked Questions

What dies come in the RCBS .300 Norma Mag set?

It's a two-die set that includes a Full-Length Sizer Die with an Expander-Decapping Unit and a Seater Die with a bullet seater plug. The sizer handles resizing, decapping, and neck expansion in one pass, while the seater places the bullet and applies a roll crimp. That covers everything you need to load this cartridge on a standard press.

Will these dies fit my press?

Yes. The set uses the standard 7/8"-14 thread, which is the common size for nearly all single-stage and turret reloading presses. If your press takes typical reloading dies, these will thread right in.

Does the RCBS .300 Norma Mag seater die crimp the bullet?

It does. The seater die has a built-in roll crimper that secures the bullet at the same time it's seated. You can set it up to seat and crimp in one operation, or back the crimp off if you'd rather seat and crimp separately.

Why is the sizer die vented?

The full-length sizer die has vents that let trapped air and excess case lubricant escape as the case is pushed in. This prevents dents, buckling, and other damage to your brass during sizing. It's a small detail that helps keep your cases in good shape over repeated loadings.

Additional information

UPC

604544629941

Manufacturer

Manufacturer Part Number

31501

Shipping Weight

1.2

Reviews

There are no reviews yet.

Be the first to review “RCBS Full-Length Die Set .300 Norma Mag – 2 Die Set 31501”