Description
Reloading the .50 BMG is a different animal from your average bottleneck rifle round, and these dies are sized to match. This is a two-die set from RCBS that handles the two jobs that matter most: resizing that massive brass back to spec and seating a bullet where you want it. Because the .50 BMG case dwarfs anything you'd run through a standard 7/8-14 die, these dies use the beefy 1-1/2 inch-12 thread and are meant to run on the RCBS AmmoMaster 2 or AmmoMaster Single Stage press with the .50 BMG conversion kit installed.
What You Get in the RCBS .50 BMG Die Set
The set includes a Full-Length Sizer Die with an expander-decapping unit and a Seater Die with a bullet seater plug. The sizer brings the case body back to minimum dimensions, deprimes the spent primer, and expands the neck to grab the next bullet, all in one pull of the handle. The seater then puts your projectile at the depth you dial in. It's the same proven two-die workflow rifle reloaders know, just scaled way up for the fifty.
How the RCBS 30001 Dies Are Built
RCBS machines these the way they do their fifty-cal tooling: reamed, hand polished, heat treated, and polished again for a smooth, consistent finish that works brass without chewing it up. That matters a lot when you're feeding expensive .50 BMG components and want every case to chamber the same way. The dies are made in the USA and carry the RCBS lifetime warranty, so they're built to outlast a whole lot of range sessions.
If you're already set up with an AmmoMaster and the .50 BMG conversion kit, this die set is the piece that turns that press into a working fifty-cal reloading station. Pair it with a good shell holder, quality brass, and the right load data and you're ready to start building rounds.
Key Specifications
- Manufacturer: RCBS
- Caliber: .50 BMG
- Die Type: Full-Length 2-Die Set
- Thread Size: 1-1/2 inch-12
- Sizer Die: Full-Length Sizer with Expander-Decapping Unit
- Seater Die: Seater Die with Bullet Seater Plug
- Compatible Press: AmmoMaster 2 / AmmoMaster Single Stage with .50 BMG Conversion Kit
- Country of Origin: Made in USA
- Manufacturer Part Number: 30001
- UPC: 076683300010
- Shipping Weight: 4.6 lbs
- Warranty: RCBS Lifetime Warranty
What’s Included
- Full-Length Sizer Die with Expander-Decapping Unit
- Seater Die with Bullet Seater Plug
Frequently Asked Questions
What press do I need to run this RCBS .50 BMG die set?
These dies are built for the RCBS AmmoMaster 2 or the AmmoMaster Single Stage press with the .50 BMG conversion kit installed. They use the oversized 1-1/2 inch-12 thread rather than the standard 7/8-14 thread, so they won't fit a typical rifle press. If you've already got the AmmoMaster and conversion kit, you're good to go.
What dies come in the RCBS 30001 set?
It's a two-die set that includes a Full-Length Sizer Die with an expander-decapping unit and a Seater Die with a bullet seater plug. The sizer handles resizing, depriming, and neck expansion in one stroke, while the seater sets bullet depth. That covers the two core steps of loading .50 BMG brass.
Will the full-length sizer deprime my .50 BMG brass too?
Yes. The Full-Length Sizer Die comes with an expander-decapping unit, so it resizes the case body back to minimum spec and punches out the spent primer in the same pass. It also expands the neck to accept the next bullet.
Are these RCBS .50 BMG dies covered by a warranty?
They are. RCBS backs their dies with a lifetime warranty, and this set is machined and hand inspected in the USA. That's a nice bit of reassurance given how serious a .50 BMG reloading setup is.



Reviews
There are no reviews yet.