Description
Every handloader who runs a .338 sizing die eventually wears out, bends, or snaps a decapping pin, and when that happens this RCBS Expander/Decapping Assembly gets you back to the bench without missing a beat. This is the complete internal rod assembly, combining an expander rod, expander ball, and decapping pin into one piece that drops right into your RCBS .338 sizing die.
The way it works is simple and clever. As the fired case travels up into the die, the decapping pin runs through the flash hole and pushes the spent primer out of the primer pocket. On the way back out, the expander ball pulls through the sized neck and opens it to the correct inside diameter so it's ready to grip a new bullet. One stroke, two jobs done, which is exactly why this little assembly earns its keep.
What the .338 Expander/Decapping Unit Covers
This one is sized for the .338 caliber family, so it fits popular bottleneck cartridges including .338 Winchester Magnum, .338 Lapua, .338 Remington Ultra Mag, and .338-378 Weatherby Magnum. If you're loading big-bore magnums, this is the unit you want in your die.
Why Keep a Spare RCBS Decapping Assembly on Hand
RCBS machines these to tight tolerances to keep the rod running true and centered, which matters for consistent neck tension and clean primer removal. Decapping pins are the part most likely to get bent or broken during a loading session, usually from a crimped primer pocket or a stray piece of media in the flash hole. Having a replacement assembly in the drawer means a bad pin doesn't cost you an evening at the press. It's also backed by RCBS's limited lifetime warranty, which is about what you'd expect from a brand that's been a mainstay of the reloading world for decades.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 9818
- UPC: 076683098184
- Caliber: .338
- Compatible Cartridges: .338 Win Mag, .338 Lapua, .338 RUM, .338-378 Weatherby Mag
- Components: Expander rod, expander ball, decapping pin
- Type: Factory replacement expander-decapping unit
- Material: Precision machined steel
- Warranty: Limited lifetime warranty
- Quantity: 1
What’s Included
- RCBS .338 caliber expander/decapping assembly (expander rod, expander ball, and decapping pin)
Frequently Asked Questions
What does the RCBS .338 Expander/Decapping Assembly do?
It handles two jobs in a single press stroke. The decapping pin pushes the spent primer out through the flash hole, and the expander ball opens the sized case neck back to the correct inside diameter so it can hold a new bullet. It installs inside your .338 RCBS sizing die.
Which cartridges does this .338 unit fit?
This assembly is sized for the .338 caliber family of bottleneck cartridges. That includes the .338 Winchester Magnum, .338 Lapua, .338 Remington Ultra Mag, and .338-378 Weatherby Magnum.
Is this a replacement part or a complete die?
This is the factory replacement expander-decapping unit, not a full die set. It's the internal rod assembly that goes inside an RCBS .338 sizing die, which makes it the right pick when your original pin gets bent or broken.
Why would I need a spare RCBS decapping assembly?
The decapping pin is the part most likely to bend or snap during loading, often from a crimped primer pocket or debris stuck in a flash hole. Keeping a spare assembly on hand means a damaged pin won't shut down your reloading session.





Reviews
There are no reviews yet.