Description
Anyone who runs a progressive or single-stage press knows the little jobs add up, and locking down a die ring is one of those tasks that gets old fast when you are reaching for channel locks or a crescent wrench every time. The RCBS Die Lock-Ring Wrench is purpose-built for exactly that. It slips straight onto a 1-3/16 inch lock ring and lets you set, tighten, and back off your sizing, seating, and crimping dies with real control instead of guesswork.
What Sets the RCBS Lock-Ring Wrench Apart
The standout feature here is the pivoting handle. It swings from flat up to a 90-degree angle, so you can get leverage even when your press is bolted to a crowded bench and you cannot get a straight pull on the ring. That little bit of adjustability makes a real difference when you are working in a tight spot or swapping dies mid-session. The hex collar grabs the ring cleanly, so you are not slipping off and marring up your hardware.
Built to Take a Beating
RCBS made this one from heat-treated steel, which is why it shrugs off the kind of brute force reloaders tend to put into a stubborn ring. The compact footprint is another quiet advantage. Reloaders have found it works well in cramped setups like turret presses where a long adjustable wrench simply will not fit. It is the kind of tool that lives in the drawer next to your press and earns its keep every time you change a die.
Fitment Notes for the Die Lock-Ring Wrench
This wrench is sized for standard 1-3/16 inch lock rings, so it pairs naturally with RCBS dies and most other brands that use a standard ring. If you reload across a few different calibers and find yourself adjusting dies often, having the right tool on hand takes the frustration out of a job you do constantly. Simple, well made, and genuinely useful at the bench.
Key Specifications
- Manufacturer: RCBS
- Model / Part Number: 9634
- UPC: 076683096340
- Type: Die Lock-Ring Wrench
- Lock Ring Size: 1-3/16 inch
- Head Style: Hex collar
- Handle: Pivoting, horizontal up to 90 degrees
- Material: Heat-treated steel
- Fitment: RCBS and other standard lock rings
- Country of Origin: USA
- Shipping Weight: 0.1375 lb
What’s Included
- RCBS Die Lock-Ring Wrench (1-3/16 inch)
Frequently Asked Questions
What size lock rings does the RCBS Die Lock-Ring Wrench fit?
It is made for standard 1-3/16 inch die lock rings. That size covers RCBS dies and most other brands that use a standard lock ring. If your dies run a non-standard ring, double check the size before counting on a clean fit.
Why does the handle pivot on this wrench?
The pivoting handle lets you adjust your angle from flat all the way up to 90 degrees. That comes in handy when your press is mounted on a crowded bench and you cannot get a straight pull on the ring. It gives you the leverage you need without fighting your own setup.
Will the RCBS lock-ring wrench work in a tight press like a turret setup?
Yes. It has a small footprint, so reloaders have had good luck using it in cramped spaces like Lee turret presses where a long adjustable wrench will not fit. The compact design is one of the reasons it is handy to keep at the bench.
What is this wrench made of?
It is built from heat-treated steel, so it stands up to the force you put into tightening and backing off stubborn lock rings. It is a simple, durable tool meant to live in the drawer next to your press for years.




Reviews
There are no reviews yet.