Description
Reloading .38 Super and .38 ACP gets a whole lot simpler with this RCBS carbide 3-die set. The headline here is the carbide sizer die. Its tungsten-carbide ring is diamond-lapped so smooth that cases don't stick or scratch, which means you can skip lubing your brass altogether. For a straight-walled semi-auto round you're running in volume, that saves time and keeps your bench cleaner. Cases don't even need to be cleaned before sizing, so prep moves right along.
What the RCBS .38 Super Die Set Does on the Press
The set works in three stages. The carbide sizer die resizes the case and knocks out the spent primer with its decapping unit. The expander die opens and bells the case mouth so a new bullet seats without shaving or crumpling the brass. The seater die handles bullet seating and finishes with a taper crimp, which is the right crimp for a rimless semi-auto cartridge like the .38 Super since these rounds headspace on the case mouth. A roll crimp would work against that, so the taper crimp here is exactly what you want.
Build Quality Behind the RCBS 20215 Set
These dies are machined to tight tolerances and finished in polished, heat-treated steel, which is the standard that's kept RCBS dies on reloading benches for generations. RCBS falls under the Group E designation for this caliber, and the dies thread into any standard 7/8-14 single-stage or progressive press.
One thing worth knowing before you load: the shellholder is sold separately. For .38 Colt Super Auto and .38 ACP you'll want the RCBS #39 shellholder, or a Lyman #12 if that's what you already run. Grab the matching shellholder and a set of load data, and you're set to start turning out .38 Super rounds tuned to your pistol.
Key Specifications
- Manufacturer: RCBS
- Caliber: .38 Super Auto / .38 ACP (.38 Colt Super Auto)
- Die Set Type: 3-Die Pistol Set
- Crimp Style: Taper Crimp
- Sizer Die: Carbide (no case lube required)
- Die Functions: Sizing, Expanding, Bullet Seating
- Material: Polished, heat-treated steel
- Die Group: Group E
- Shellholder: RCBS #39 (sold separately)
- Thread: 7/8-14 (standard)
- Manufacturer Part Number: 20215
- UPC: 076683202154
- Country of Origin: United States
What’s Included
- Carbide sizer die with decapping unit
- Expander die (expands and bells case mouth)
- Seater die with taper crimp and bullet seater plug
Frequently Asked Questions
Do I need to lubricate my brass with the RCBS carbide .38 Super die set?
No. The carbide sizer die uses a diamond-lapped tungsten-carbide inner ring that's smooth enough that cases won't stick or scratch, so you can skip the case lube step entirely. You also don't need to clean cases before sizing, which speeds up your prep.
Does this die set come with a shellholder?
No, the shellholder is sold separately. For .38 Super and .38 ACP you'll want the RCBS #39 shellholder, or a Lyman #12 if that's what you already run on your press. It's an inexpensive add-on, so grab one when you order the dies.
What kind of crimp does the RCBS 20215 set use?
The seater die applies a taper crimp, which is the correct choice for the .38 Super and .38 ACP. These are rimless semi-auto rounds that headspace on the case mouth, so a taper crimp keeps that headspacing intact while still holding the bullet securely.
Will these dies fit my press?
Yes. The dies use the standard 7/8-14 thread, so they'll thread into virtually any single-stage, turret, or progressive press. Just pair them with the correct #39 shellholder for proper case alignment.




Reviews
There are no reviews yet.