0
0

RCBS Carbide Sizer Die .38 Special/.357 Mag – No-Lube Sizing #18237

UPC: 076683182371

$73.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you've ever wiped case lube off a hundred pieces of brass, you already know why carbide dies are worth it. The RCBS Carbide Sizer Die for .38 Special and .357 Magnum uses a diamond-lapped tungsten-carbide inner ring that resizes straight-walled cases without any lubrication at all. That one change takes a messy, time-eating step completely out of your routine, and the polished carbide surface is slick enough that cases won't stick or get scratched on the way through.

This is a single sizer die with the decapping unit built in, so it sizes the case and pushes out the spent primer in the same stroke. It's cut with standard 7/8 x 14 threads, which means it drops straight into just about any standard single-stage or progressive press on the bench. The hardened die body holds its adjustment, and the expander-decapping assembly threads in and locks down so it doesn't drift on you mid-session.

What the RCBS Carbide Sizer Die Does on the Press

One pass sizes the case back to proper dimensions and knocks the old primer loose. Because the carbide ring handles the sizing, you can run freshly tumbled brass straight into the die without lubing first. Reloaders who've made the jump report smooth, consistent resized brass with no extra effort and no lube cleanup afterward. It runs the same whether you load .38 Special plinking rounds or full-house .357 Magnum.

Fitting the .38 Special/.357 Mag Sizer Die to Your Setup

This die uses RCBS Shell Holder #6, which is sold separately if you don't already have one in your kit. The same die covers both .38 Special and .357 Magnum since they share case dimensions, so one tool handles both chamberings. It's also the exact sizer found in the RCBS Carbide Roll Crimp 3-Die Set, so if you later want the matching expander and roll crimp seater dies, everything lines up. RCBS backs it with their lifetime limited warranty, which tells you plenty about how long these are built to last.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number: 18237
  • UPC: 076683182371
  • Caliber: .38 Special / .357 Magnum
  • Die Type: Carbide Sizer Die with Decapping Unit
  • Sizing Ring: Diamond-lapped tungsten carbide
  • Thread Size: 7/8 x 14
  • Shell Holder: Uses RCBS Shell Holder #6 (sold separately)
  • Lubrication: No case lube required
  • Country of Origin: USA
  • Warranty: RCBS Lifetime Limited Warranty

What’s Included

  • RCBS Carbide Sizer Die (.38 Special/.357 Magnum)
  • Decapping unit

Frequently Asked Questions

Do I need to lube my cases with the RCBS Carbide Sizer Die?

No. The diamond-lapped tungsten-carbide ring inside the die sizes brass without any lubrication at all. You can run clean, tumbled cases straight into the die, which also means no lube to wipe off afterward.

Does the RCBS Carbide Sizer Die remove the old primer?

Yes. It comes with a decapping unit, so it sizes the case and pushes out the spent primer in a single stroke on the press. That expander-decapping assembly threads in and locks so it stays put during a reloading session.

Which shell holder does the .38 Special/.357 Mag sizer die use?

This die uses RCBS Shell Holder #6, which is sold separately. If you're already set up for other similar-sized cartridges you may have one on hand, but plan to pick one up if you don't.

Will one die handle both .38 Special and .357 Magnum?

Yes. The two cartridges share the same case dimensions, so this single die sizes both. It's also the exact sizer die found in the RCBS Carbide Roll Crimp 3-Die Set if you want to add the matching expander and roll crimp seater dies later.

Additional information

UPC

076683182371

Manufacturer

Manufacturer Part Number

18237

Shipping Weight

0.6688

Reviews

There are no reviews yet.

Be the first to review “RCBS Carbide Sizer Die .38 Special/.357 Mag – No-Lube Sizing #18237”