Description
If you've ever loaded a round with the wrong powder charge or seated a bullet a touch too deep, you know pulling it apart beats tossing good components. This RCBS 9.3mm collet is the business end that makes that happen. It's the caliber-specific insert for the RCBS Standard Bullet Puller, sized for 9.3mm projectiles measuring around .366 inches. The collet clamps onto the bullet like a lathe chuck grips stock, then holds firm while the case gets drawn away, leaving both the bullet and brass in reusable shape.
How the 9.3mm Collet Fits Your Setup
This is a collet only, not the full puller body, so it threads into the RCBS Standard Bullet Puller that mounts in your press. It uses the common 7/8"-14 thread, which means it plays nice with just about any single stage or turret press running that standard. If you already own the Standard Bullet Puller and a few other collets, this one just expands your caliber range. Worth noting it's built for the smaller 7/8"-14 thread puller, not the larger 1-14 thread version.
What the RCBS 9.3mm Puller Collet Handles
Beyond straight 9.3mm loads, reloaders have found this collet useful for oddball diameters that fall in the same neighborhood, since .366 covers a bit of ground. The trick with any collet puller is snugging it down just enough to grip without crushing the jacket. A little feel goes a long way here, and once you've got the tension dialed in, pulls come out clean and repeatable.
Why Reloaders Keep an RCBS Bullet Puller Collet on the Bench
Collet pullers are the gentle way to break down ammo. Unlike inertia-style pullers that hammer the bullet loose, the collet method grips and draws, which keeps bullet tips and meplats intact for folks who care about reusing their projectiles. For anyone salvaging components or correcting a batch of loads, having the right caliber collet on hand turns a frustrating problem into a two-minute fix.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 9437
- UPC: 076683094377
- Caliber: 9.3mm (.366)
- Type: Collet for Standard Bullet Puller
- Thread: 7/8"-14
- Material: Steel
- Quantity: 1
- Country of Origin: USA
- Shipping Weight: 0.08 lb
What’s Included
- One RCBS 9.3mm (.366) Bullet Puller Collet
Frequently Asked Questions
Do I need the RCBS Standard Bullet Puller to use this 9.3mm collet?
Yes. This is the collet only, not the complete puller. It threads into the RCBS Standard Bullet Puller body, which is what actually mounts in your press. If you don't already own that puller, you'll want to pick one up alongside this collet.
Will the RCBS 9.3mm collet fit my press?
The Standard Bullet Puller that this collet fits uses the common 7/8"-14 thread, so it works with just about any single stage or turret press running that standard. Keep in mind this collet is made for the 7/8"-14 thread puller and will not work with the larger 1-14 thread bullet puller.
What bullet diameter does this 9.3mm puller collet grip?
It's sized for 9.3mm projectiles, which run around .366 inches in diameter. Some reloaders also use it for nearby diameters that fall in that range. For best results, snug it onto the bullet just enough to grip without over-tightening and crimping the projectile.
Does the RCBS collet damage bullets when pulling them?
The collet style is designed to grip and draw the case away rather than hammer the bullet loose, which keeps jacketed bullets intact for reuse. RCBS states the collets won't damage jacketed bullets. A little trial and error on tension dials in clean, repeatable pulls.



Reviews
There are no reviews yet.