Description
If you've been prepping brass by hand, you already know how much time it eats up and how sore your fingers get after a hundred cases. The RCBS Brass Boss is built to fix that. It's a powered case prep station with six rotating stations that let you run through every finishing step on trimmed brass in one place, so you spend less time fussing with individual tools and more time at the loading bench or behind the trigger.
What the Brass Boss Brings to the Bench
The heart of this unit is its variable-speed design. Four of the stations spin up to 350 rpm while the other two run faster at up to 550 rpm, and a knob lets you dial the speed in to cut chatter and get a clean finish. That split is genuinely useful in practice: you can crank up the speed for heavier work like removing military crimps off once-fired brass, then back it down for careful jobs like inside-neck chamfering where you don't want to take off too much. Two fixed stations hold case neck brushes for cleaning and knocking off shavings before and after prep.
Tools Packed With the Brass Boss
RCBS doesn't make you hunt down accessories to get started. The Brass Boss ships with an inside VLD chamfering tool, an outside deburring tool, small and large primer pocket cleaners, small and large military crimp removers, small and large primer pocket uniformers, four case neck brushes in different diameters, and a tub of dry case neck lube. When you're done, there's onboard storage so everything has a home and your bench stays organized.
Power and Setup for the Brass Boss
This version runs on 120-240 VAC and ships with US, UK, EU, and Australian power cords, so it works across different regions. The power supply plugs into the back rather than being hardwired, which makes it easy to store the unit between sessions and keep your bench clear. Reloaders who process brass in batches tend to love how much faster it moves things along, and it carries a 2-year limited warranty behind RCBS's long reputation for solid reloading gear.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 90390
- UPC: 604544621174
- Type: Case Prep Center
- Number of Stations: 6 variable-speed plus 2 fixed neck-brush stations
- Station Speeds: Four up to 350 rpm, two up to 550 rpm
- Voltage: 120-240 VAC
- Power Cords: US, UK, EU, and Australian
- Warranty: 2-year limited
- Overall Length: 12.9 in
- Shipping Weight: 6.56 lbs
What’s Included
- RCBS Brass Boss case prep station
- Inside VLD chamfering tool
- Outside deburring tool
- Small and large primer pocket cleaners
- Small and large military crimp removers
- Small and large primer pocket uniformers
- Four case neck brushes (varying diameters)
- Tub of dry case neck lubricant
- US, UK, EU, and Australian power cords
Frequently Asked Questions
What operations can the Brass Boss handle?
The Brass Boss covers the full range of trimmed-brass finishing: inside VLD chamfering, outside deburring, primer pocket cleaning, military crimp removal, primer pocket uniforming, and case neck brushing. All the tooling for those jobs comes in the box. It lets you move from station to station instead of swapping tips on a single hand tool.
How fast do the stations spin on the RCBS Brass Boss?
Four of the six stations run at up to 350 rpm and the other two run faster at up to 550 rpm. The speed is variable with a dial, so you can fine-tune it to reduce chatter and get the finish you want. The faster stations are handy for tougher work like military crimp removal, while slower speeds suit careful jobs like inside-neck chamfering.
Does the Brass Boss work on international voltage?
Yes. This model runs on 120-240 VAC and ships with US, UK, EU, and Australian power cords, so it's set up to work across different regions. The power supply plugs into the back of the unit rather than being permanently attached.
Do I need to buy any extra tools to get started?
No. The Brass Boss comes with tooling for all stations right out of the box, including chamfer and deburr tools, primer pocket cleaners, crimp removers, uniformers, neck brushes, and a tub of dry neck lube. There's also onboard storage so the tools you aren't using stay put and your bench stays tidy.



Reviews
There are no reviews yet.