Description
If you're running an RCBS progressive and loading 30 Caliber M1 Carbine or 32 ACP, the #17 shell plate is the piece that holds your brass in place and lines each case up with the die as the plate indexes around. It's a simple part, but it's the one that keeps everything feeding and seating where it should, and a clean, accurate load starts right here.
RCBS machines these from hardened steel so they hold up to high-volume sessions without wearing out of spec. The plate grabs 0.125 inch of the case head, which keeps your cases held to proper SAAMI headspacing through sizing, priming, and seating. Five stations means you've got room for the full sequence as the plate rotates, and that's what lets a progressive press really earn its keep on volume days.
Where the #17 Shell Plate Fits
This plate is sized specifically for the 30 Carbine and 32 ACP case head, so matching the number to your cartridge is the whole game here. The #17 drops onto the RCBS Piggyback, Piggyback II, Piggyback 3, Piggyback 4, AmmoMaster Auto, Pro 2000, and Pro 2000 Auto presses. If you're running one of those, this is the correct plate to get your 30 Carbine or 32 ACP brass cycling.
Built for the Long Haul
Reloaders run through a lot of brass over the life of a press, and a shell plate takes the brunt of it every stroke. The hardened steel construction and precision machining are what let this plate keep cases aligned trip after trip without slop creeping in. Pair it with the matching shell plate screw and you've got a setup that keeps your rounds consistent and your press running the way RCBS built it to. RCBS has been doing this since 1943, and these plates carry that same no-nonsense build quality you'd expect from the green gear.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 88817
- UPC: 076683888174
- Shell Plate Number: #17
- Caliber: 30 Caliber M1 Carbine / 32 ACP
- Stations: 5
- Material: Hardened Steel
- Finish: Black
- Case Head Capture: 0.125 inch (SAAMI headspacing)
- Compatible Presses: Piggyback, Piggyback II, 3, 4, AmmoMaster Auto, Pro 2000, Pro 2000 Auto
- Quantity: 1 (each)
- Country of Origin: USA
What’s Included
- One RCBS #17 5-Station Shell Plate (88817)
Frequently Asked Questions
Which presses does the RCBS #17 shell plate work with?
The #17 is made for the RCBS Piggyback, Piggyback II, Piggyback 3, Piggyback 4, AmmoMaster Auto, Pro 2000, and Pro 2000 Auto progressive presses. It will not fit the RCBS 4×4 press. Match the plate to one of those presses and you're set.
What calibers does the #17 shell plate cover?
This shell plate is sized for the 30 Caliber M1 Carbine and 32 ACP case head. The number on the plate corresponds to the case head dimension, so if you're loading either of those cartridges, the #17 is your plate.
What is the shell plate actually doing during reloading?
It holds the case and lines it up with the die at each station as the plate indexes around the press. It captures 0.125 inch of the case head to keep your brass at proper SAAMI headspacing through sizing, priming, and seating. That alignment is a big part of getting consistent, accurate rounds off a progressive.
Do I need anything else to run this shell plate?
The shell plate itself mounts to your press, but you'll want the correct shell plate screw and matching dies set up for your cartridge. If you're switching calibers on your press, you swap the plate to match the case head. Beyond that, it drops right into your existing RCBS progressive setup.





Reviews
There are no reviews yet.