Description
If you run an RCBS progressive setup and load 9mm or the old 30-caliber pistol rounds, the #16 shell plate is the piece that keeps everything rolling. It cradles the case head at all five stations so your brass lines up square with the dies as the plate indexes, which is what gives you that smooth, repeatable rhythm handloaders are after. This is the plate RCBS cuts for the 9mm family and its relatives, so it covers a surprising range of cartridges from one tool.
It's machined from hardened steel and grabs 0.125 inch of the case head, which keeps your headspacing right where it should be while the case moves through sizing, priming, charging, and seating. That solid grip matters on a progressive, since a case that sits loose or crooked is where most jams and crushed brass come from. The #16 keeps things tight and predictable.
What the RCBS #16 Shell Plate Fits
This plate is made for RCBS progressive and piggyback presses, specifically the Piggyback, Piggyback II, Piggyback 3, and Piggyback 4 conversion units along with the AmmoMaster Auto, Pro 2000, and Pro 2000 Auto. If you're running one of those presses, the #16 drops right into the indexing setup.
Cartridges the #16 Covers
The #16 handles a nice spread of cases that share a similar rim and head diameter. That includes 9mm Luger, 30 Luger (7.65mm Luger), 30 Mauser (7.63mm Mauser), 9mm Makarov, 9mm x 21, 9mm x 23 Winchester, 356 TSW, and 41 AE. For anyone loading a mix of these on a single press, it means one plate does a lot of work. As always, match your shell plate to your specific press and dies, and confirm the case fit before you start a full run so everything indexes cleanly.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 88816
- Model: 5-Station Shell Plate #16
- UPC: 076683888167
- Type: 5-Station Progressive Shell Plate
- Material: Hardened Steel
- Case Head Capture: 0.125 inch for SAAMI headspacing
- Compatible Calibers: 9mm Luger, 30 Luger, 30 Mauser, 9mm Makarov, 9mm x 21, 9mm x 23 Winchester, 356 TSW, 41 AE
- Compatible Presses: Piggyback, Piggyback II/3/4, AmmoMaster Auto, Pro 2000, Pro 2000 Auto
- Quantity: 1 (Each)
- Shipping Weight: 0.35 lb
What’s Included
- One RCBS #16 5-Station Shell Plate
Frequently Asked Questions
Which presses does the RCBS #16 shell plate work with?
The #16 is built for RCBS progressive and piggyback presses, including the Piggyback, Piggyback II, Piggyback 3, and Piggyback 4 conversion units, plus the AmmoMaster Auto, Pro 2000, and Pro 2000 Auto. If you run one of those setups, this plate fits right into the indexing system. It is not designed for the Pro Chucker 5, which uses a different #16 plate.
What cartridges can I load with the #16 shell plate?
It covers the 9mm family and some close relatives: 9mm Luger, 30 Luger, 30 Mauser, 9mm Makarov, 9mm x 21, 9mm x 23 Winchester, 356 TSW, and 41 AE. Those cases share a similar rim and head size, so one plate handles the whole group. This is the only 5-station plate RCBS makes that handles the 9mm cartridge.
What is the shell plate made of and why does the 0.125-inch case capture matter?
The #16 is machined from hardened steel so it holds up to the repeated indexing and resizing forces of a progressive press. It captures 0.125 inch of the case head, which keeps your brass positioned for proper SAAMI headspacing. A secure, square hold is what keeps cases from tilting or hanging up as the plate rotates.
Do I need anything else to use the #16 shell plate?
The plate ships on its own as a single piece. You'll install it on your existing RCBS progressive or piggyback press along with the correct dies for your cartridge. Follow your press and die instructions when setting it up and check that your specific case indexes cleanly before a full loading session.



Reviews
There are no reviews yet.