Description
Every reloader eventually loads a round they need to take apart, whether it's a wrong powder charge, a seating depth that drifted off, or a batch that just didn't come together right. The RCBS .45 Cal Bullet Puller Collet is the piece that makes that fix clean and simple. This is the caliber-specific collet only, sized for .45 bullets in the .451 to .454 range, and it's what grabs onto the bullet while you pull the case away.
The design works a lot like a draw collet on a lathe. As you raise the ram and draw the case down, the collet clamps tighter around the bullet, locking it in place so the case slides free. That grip is firm enough to hold most bullet shapes and lengths without chewing up or deforming a jacketed projectile, which means you get to reuse the bullet, the powder, and the brass instead of tossing a mistake in the scrap bin.
Where the .45 Collet Fits In
This collet is built to drop into the RCBS Standard Bullet Puller body, which uses the common 7/8-14 thread found on just about every single-stage press out there. Worth knowing before you order: the collet and the puller body are separate items. If you already run the RCBS Standard Bullet Puller, this collet simply swaps in whenever you're working .45 ammo. If you're starting from scratch, you'll want the puller (part number 9440) too.
Calibers the 9436 Collet Handles
Because .45 covers a lot of ground, this one collet earns its keep across plenty of popular rounds. Think .45 ACP, .45 Colt, .450 Bushmaster, and .45-70 among others that share that bullet diameter. It's a small, simple steel part, but it's the kind of thing you're glad to have on the bench the day a loading goes sideways and you'd rather save the parts than start over.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 9436
- UPC: 076683094360
- Product Type: Bullet Puller Collet
- Caliber: .45 Cal (.451-.454)
- Size: Standard
- Thread: 7/8-14
- Compatible With: RCBS Standard Bullet Puller (9440)
- Material: Metal
- Finish: Silver
- Length: 2.5 in
- Quantity: 1
What’s Included
- One RCBS .45 Cal Bullet Puller Collet (9436)
Frequently Asked Questions
Does the RCBS .45 Cal Bullet Puller Collet come with the puller?
No, this listing is for the collet only. You'll need the RCBS Standard Bullet Puller body (part number 9440) to use it, sold separately. If you already own that puller, this collet simply drops in when you're working .45 caliber ammo.
What cartridges will the 9436 collet work with?
It's sized for .45 caliber bullets in the .451 to .454 diameter range, so it covers a lot of common rounds. That includes loads like .45 ACP, .45 Colt, .450 Bushmaster, and .45-70. As long as the projectile falls in that diameter, this collet will grab it.
Will it damage my bullets when I pull them?
It's designed to pull most lengths and shapes of jacketed bullets without distorting them. The collet clamps evenly around the bullet as the case draws away, much like a draw collet on a lathe, so you can save and reuse your components. It's intended for jacketed bullets.
Does this collet fit my press?
The RCBS Standard Bullet Puller uses the standard 7/8-14 thread, which is the size found on virtually every single-stage reloading press. So as long as your press takes 7/8-14 dies, the puller and this collet will thread right in. Note it is not compatible with the larger collet puller made for 1-14 thread presses.




Reviews
There are no reviews yet.