Description
The shell holder is one of those small parts that quietly makes or breaks a reloading session, and the RCBS #6 is built to do its job without fuss. It sits in the ram of your press, grips the rim of the case, and keeps everything aligned as the case travels up into the die. Get this part wrong and you end up chasing headspace and sizing issues, so it pays to run a quality piece. RCBS machines these from hardened steel, which holds its tolerances through thousands of cycles at the bench.
What the RCBS Shell Holder #6 Fits
The #6 is sized for a specific family of case heads, and it covers a nice range. It works with .22 Remington Jet, 5.6mm x 50 Rimmed, .256 Winchester Magnum, .357 Magnum, .357 Remington Maximum, .38 Smith & Wesson, and .38 Special. That makes it a popular pick for revolver reloaders running the .38/.357 pairing, since one holder takes care of both. Always double check your cartridge against the RCBS shell holder chart before you load, since the number stamped on the holder is what matters, not the box.
How the #6 Keeps Your Headspace in Check
This holder is cut to grip 0.125 inch of the case head, which is what sets proper SAAMI headspacing when the case bottoms out against the die. That controlled depth is the difference between brass that chambers smoothly and brass that gives you grief. Because it's held to tight tolerances, the case sits square and centered every single time, so your sizing stays uniform round after round.
A Bench Tool That Earns Its Keep
It drops into RCBS single stage and turret presses, and thanks to the standard snap ring groove it plays nice with most other brands of single stage press too. There's nothing fancy here and that's the point. It's a simple, durable piece that reloaders reach for without thinking, and once it's in your press you tend to forget it's there, which is exactly what you want from a shell holder.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 9206
- UPC: 076683092069
- Shell Holder Number: #6
- Material: Hardened Steel
- Finish: Silver
- Case Head Capture Depth: 0.125 in
- Press Compatibility: Single Stage and Turret Presses
- Compatible Cartridges: .22 Rem Jet, 5.6mm x 50 Rimmed, .256 Win Mag, .357 Mag, .357 Rem Max, .38 S&W, .38 Special
- Style: Press Type
- Quantity: 1
- Weight: 4 oz
What’s Included
- RCBS Shell Holder #6 (one shell holder)
Frequently Asked Questions
What cartridges does the RCBS Shell Holder #6 fit?
The #6 is designed for .22 Remington Jet, 5.6mm x 50 Rimmed, .256 Winchester Magnum, .357 Magnum, .357 Remington Maximum, .38 Smith & Wesson, and .38 Special. It's a favorite for revolver reloaders because one holder covers both .38 Special and .357 Magnum. Always confirm your specific cartridge against the RCBS shell holder chart before loading.
Will the RCBS #6 shell holder work in presses other than RCBS?
Yes. It's built primarily for RCBS single stage and turret presses, but because it uses a standard snap ring groove design, it fits virtually any single stage press on the market. Many reloaders run RCBS holders in Lee, Hornady, and other brand presses without issue.
Why does the 0.125 inch case head capture matter?
That depth is what sets proper SAAMI headspacing when the case bottoms out in the die. Capturing exactly 0.125 inch of the case head keeps the round sitting square and centered, which gives you consistent sizing and brass that chambers smoothly. A loose or off-spec holder is one of the most common causes of headspace and sizing headaches.
Is the RCBS Shell Holder #6 made of durable material?
It's machined from hardened steel, so it holds its tolerances through heavy use at the bench. These are made to exacting tolerances and will last through years of reloading without wearing out.





Reviews
There are no reviews yet.