Description
If you handload and you're tired of chasing your charge weight every time you sit down at the bench, the RCBS UPM-3 Competition Powder Measure takes a lot of the guesswork out of it. This is RCBS's highest quality mechanical measure to date, and it shows in how it meters all powder types by volume across a wide 0.5 to 100 grain range. A single metering cylinder and screw assembly covers both pistol and rifle loads, so you aren't swapping cylinders or buying extra parts to jump between a light handgun charge and a heavier rifle load.
The heart of it is the MatchMaster micrometer adjustment screw. It lets you make fine adjustments down to a tenth of a grain, and more importantly, it lets you record the exact number you settled on. When you come back to that load weeks or months later, you just dial the setting back in and pick up where you left off. That repeatability is what separates this from a basic thrower, and it's a big deal if you shoot more than one load regularly.
What Sets the UPM-3 Competition Apart
RCBS built this around the proven Uniflow design and added a powder baffle that controls flow and keeps the pressure of the powder column steady on the metering unit. That consistency is what gives you clean, repeatable throws instead of charges that drift as the hopper empties. The body is cast iron construction, so it has the weight and rigidity you want for smooth, chatter-free cycling. The hopper is threaded for quick removal and holds a full pound of powder.
Setup and Everyday Use on the UPM-3 Competition
The handle mounts on either the right or left side, so lefties and righties both get a natural pull. A quick-change drain attachment and two drop tubes come in the box, making it fast to empty powder back into the can or switch between setups. One thing worth knowing: RCBS recommends pairing this measure with a good powder scale to set your original charge and spot-check it during a run, and it is not meant for use with black powder. Set it up right and this thing will throw consistent charges for years.
Key Specifications
- Manufacturer: RCBS
- Model: UPM-3 Competition
- Manufacturer Part Number: 9032
- UPC: 604544696738
- Metering Range: 0.5 to 100 Grains
- Accuracy: 0.10 Grain
- Adjustment: MatchMaster Micrometer Adjustment Screw
- Hopper Capacity: 1 Pound
- Hopper Type: Threaded for Quick Removal
- Handle: Ambidextrous, Right or Left Side
- Material: Cast Iron
- Color: Black/Green
- Length: 14.8 inches
- Country of Origin: USA
- Warranty: Manufacturer Limited Lifetime
What’s Included
- RCBS UPM-3 Competition Powder Measure
- Powder baffle
- Micrometer adjustment screw
- Quick-change drain attachment
- Two drop tubes
Frequently Asked Questions
What powder charge range does the UPM-3 Competition cover?
The UPM-3 Competition meters from 0.5 to 100 grains using a single cylinder and screw assembly. That span covers everything from light pistol charges up through heavy rifle loads without swapping parts. The exact top end you can throw depends on the powder type and its density.
How accurate is the RCBS UPM-3 Competition Powder Measure?
It's rated for 0.10 grain accuracy thanks to the MatchMaster micrometer adjustment screw. The micrometer also lets you record your exact setting so you can dial the same charge back in later. RCBS still recommends verifying charges on a powder scale when you set up and periodically during a run.
Can I use the UPM-3 Competition for both pistol and rifle reloading?
Yes. One metering cylinder and screw handles both pistol and rifle applications, so there's no need for separate cylinders or extra accessories. It meters all powder types by volume across its full range, though it is not intended for use with black powder.
Does the UPM-3 Competition work for left-handed reloaders?
It does. The handle can be mounted on either the right or left side of the measure, so the operation is fully ambidextrous. That makes it comfortable to run no matter which hand you prefer to pull with.




Reviews
There are no reviews yet.