Description
The RCBS Decap Die in .22-.25 caliber does one job and does it cleanly: it pushes spent primers out of fired cases before cleaning and inspection. Because it only decaps and doesn't size the brass, you can run crusty, dirty range pickups through it without worrying about grinding grit into your sizing dies. That's the whole appeal for a lot of reloaders, keep the junk out of your precision dies and let the cheap workhorse take the abuse.
How the RCBS .22-.25 Decapping Die Fits Your Bench
This die threads into any standard 7/8-14 single stage or turret press, same as your other RCBS dies. A common setup is to dedicate a cheap press to decapping duty with this die left in it, then just swap shell holders as you move between cartridges. It covers a wide spread of small bottleneck and straight-wall cases in the .22 to .25 range, so one die can handle a pile of mixed brass. Keep in mind the decapping pin clears the flash hole and drives the primer straight out of the pocket, so make sure your shell holder is seated all the way before you run the ram up.
What the Decap Die .22-.25 Is Built For
Think of this as your first-stage tool. The idea is to deprime first, clean the brass with the primer pockets open, then move to sizing with clean cases. For standard fired brass this handles the load without fuss. If you're wrestling with heavily crimped military primers in the larger calibers, RCBS builds a separate heavy-duty version in .27-.45 with a spring-assisted pin for that specific job, but for routine .22-.25 depriming this is the one you want.
It's a simple, steel-built tool that earns its keep. Reloaders who've run RCBS gear for decades tend to trust the brand's quality and customer support, and a basic decapping die like this is about as dependable as reloading equipment gets. Pick up a spare decap pin or two and you're set for a long time.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 87580
- UPC: 076683875808
- Product Type: Universal Decapping Die
- Caliber Range: .22 to .25 Cal
- Dies In Set: 1
- Thread: 7/8-14 Standard
- Material: Steel
- Carbide: No
- Replacement Decap Unit: 87575
- Length: 5.95 in
- Width: 4.50 in
- Height: 1.75 in
What’s Included
- RCBS .22-.25 caliber universal decapping die
- Plastic storage box
Frequently Asked Questions
Does the RCBS .22-.25 decap die resize the brass too?
No, this die only removes spent primers and does not size the case in any way. That's actually the point of a universal decapping die, it lets you deprime dirty brass without pushing grit into your sizing dies. You'll still need a separate sizing die to work the brass before loading.
Does the Decap Die .22-.25 come with a shell holder?
No, shell holders are not included and are sold separately. You'll need the correct RCBS shell holder for whatever case you're depriming. Make sure the shell holder is seated fully before raising the ram, since bottoming out with the holder not fully in can bend the decap pin.
Will this die handle crimped military primers?
This .22-.25 version is the standard decapping die and will deprime most fired cases in that caliber range. For heavily crimped military primers, RCBS makes a separate heavy-duty die in .27-.45 with a spring-assisted pin designed specifically for that stubborn job. For routine .22-.25 depriming, this one gets it done.
What caliber cases does the RCBS 87580 decap die cover?
It's built to handle most cases in the .22 through .25 caliber range, covering a wide spread of small bottleneck and straight-wall brass. Because it doesn't size anything, the same die works across all those cartridges as long as you swap to the right shell holder. If you need a replacement decapping unit down the road, RCBS part 87575 fits this die.




Reviews
There are no reviews yet.