Description
The .44 Auto Mag has always been a reloader's cartridge. Factory ammo has been scarce since the round showed up in 1971, so just about everyone running an Auto Mag pistol forms their own brass and loads their own ammo. That makes a quality set of dies less of a nice-to-have and more of a requirement, and RCBS is the name people have trusted for this chambering for decades. This set is machined to tight tolerances and built to the standards RCBS is known for.
The set covers the three jobs you need for straight-wall, rimless cases. The carbide sizer die resizes the case and knocks out the spent primer in one stroke, and because the sizing ring is carbide you can skip the case lube step entirely. The expander die opens the case mouth to the proper diameter and puts a light flare on it so your .429 bullet starts straight and seats clean. The seater die handles bullet seating and applies a taper crimp, which is exactly what you want on a cartridge that headspaces on the case mouth instead of a rim.
Why the Taper Crimp Matters on .44 Auto Mag
A roll crimp works great on revolver rounds with a cannelure, but a rimless semi-auto case like the .44 AMP needs to headspace off the mouth. The taper crimp on this RCBS set gently removes the flare and squares up the mouth without biting into the bullet, so your rounds chamber and feed reliably through the Auto Mag's rotary bolt. For folks forming brass from cut-down .308 or .30-06, this die set is the back half of the equation once your cases are trimmed and reamed.
What You Get With the RCBS 56541 Die Set
These dies use the standard 7/8-14 thread, so they drop into any common single-stage or turret press. They are made in the USA and ship in the familiar RCBS box with instructions. If you own one of these pistols, whether an original AMT, High Standard, or a newer Auto Mag Ltd build, this is the set that keeps it fed.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 56541
- UPC: 076683565419
- Caliber: .44 Auto Mag (.44 AMP)
- Die Type: Carbide Sizer / Expander / Taper Crimp Seater
- Number of Dies: 3
- Die Series: Group E, Straight-Walled Calibers
- Thread: 7/8-14
- Carbide Sizer: Yes, no case lube required
- Country of Origin: USA
What’s Included
- Carbide sizer die with decapping unit
- Expander die
- Taper crimp seater die
- Instructions
Frequently Asked Questions
Does the RCBS 56541 set require case lube?
No. The sizer die uses a carbide sizing ring, which lets you resize your .44 Auto Mag brass without lubricating the cases. That saves a step and keeps your bench cleaner during high-volume sessions. You will still want to keep your dies and brass clean for best results.
Why does this set use a taper crimp instead of a roll crimp?
The .44 Auto Mag is a rimless, straight-wall cartridge that headspaces on the case mouth, much like a semi-auto pistol round. A taper crimp removes the flare and squares the mouth without rolling into the bullet, which keeps that headspacing correct and helps feeding through the Auto Mag's action. A roll crimp is better suited to rimmed revolver rounds with a cannelure.
Will these dies fit my reloading press?
Yes. The dies use the industry-standard 7/8-14 thread, so they thread into common single-stage, turret, and most progressive presses. You will just need the correct shell holder for the .44 Auto Mag case head.
Do I still need to form my own brass with this set?
Likely, yes. Factory .44 Auto Mag ammo has always been hard to find, and many handloaders form cases from cut-down .308 Winchester or .30-06 brass, then trim and ream them to length. Starline also produces headstamped .44 AMP brass. Once your cases are formed and trimmed, this RCBS set handles sizing, flaring, seating, and crimping.



Reviews
There are no reviews yet.