0
0

RCBS 30207 22 ARC Small Base Taper Crimp 2-Die Set (AR Series)

UPC: 604544700039

$61.99

11 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

RCBS put this two-die 22 ARC set together with one job in mind: keeping your reloads running smooth through gas guns. It combines a small base full-length sizing die with a taper crimp seating die, which is the combo you want when your brass is going back into an AR-15 or any other semi-auto chambered in 22 ARC. The small base sizer squeezes the case body and shoulder down a touch more than a standard full-length die, and that little bit of extra sizing is what gives you confidence the round drops in and extracts clean even when the rifle gets hot and dirty.

Why the Small Base Sizer Matters in a 22 ARC Reload

Semi-autos slam brass around and don't give you the gentle camming power of a bolt gun to close on a tight round. The small base die in this set sizes brass a few thousandths below standard full-length specs at the base and shoulder, which is the reliability insurance semi-auto handloaders lean on. It also deprimes the case as you size, so you're knocking out two steps in one pull of the handle. If you're loading range brass or mixing cases that have been through different rifles, that extra margin keeps feeding predictable.

The Taper Crimp Seater and Progressive Loading

The taper crimp seating die is the other half of the equation. Taper crimping is more forgiving when your cases aren't all trimmed to the exact same length, which happens a lot in batch loading. It helps hold the bullet without buckling the shoulder or bulging the neck, and it plays especially nice with cannelured bullets. That makes this set a natural fit for folks running a progressive press and cranking out volume, though it works just as well on a single stage.

Made the RCBS Way

These dies are made in Oroville, California from the same proprietary steel RCBS uses across its Precisioneered line, so you're getting the same build quality that's lived on handloading benches since 1943. The 22 ARC itself is a flat-shooting, low-recoil varmint and target round that delivers big-caliber reach from an AR-15, and this set is dialed in to feed that performance. Shell holder and shell plate are sold separately, and you'll want the RCBS #32 to go with it.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number: 30207
  • UPC: 604544700039
  • Caliber: .22 ARC
  • Product Type: Small Base / Taper Crimp
  • Series: AR Series
  • Number of Dies: 2
  • Press Compatibility: Single Stage or Progressive
  • Shell Holder: RCBS #32 (sold separately)
  • Shell Plate: RCBS #32 (sold separately)
  • Country of Origin: Made in Oroville, California USA
  • Length: 5.95 in
  • Shipping Weight: 1.14 lb

What’s Included

  • Small Base Full-Length Sizing Die
  • Taper Crimp Seating Die

Frequently Asked Questions

Why would I choose the RCBS 30207 small base set over a standard full-length 22 ARC die set?

The small base sizer in this set works the case body and shoulder down a few thousandths smaller than a standard full-length die, which gives you extra insurance that rounds chamber and extract cleanly in a semi-auto. That matters most when your rifle runs hot and dirty or you're loading mixed range brass. If feeding reliability in an AR-15 is your priority, this is the set built for that job.

Does the RCBS 30207 set come with a shell holder?

No, the shell holder and shell plate are sold separately. For the 22 ARC you'll want the RCBS #32 shell holder, part number RC09232, and the matching #32 shell plate if you're running a progressive. It's an easy add-on to grab at the same time so you're ready to load right out of the gate.

Can I use this 22 ARC set on a progressive press?

Yes, RCBS designed this AR Series set with progressive loading in mind, which is one reason it uses a taper crimp seater. The taper crimp is more forgiving when case lengths vary a little across a batch, so it suits high-volume loading well. It works just fine on a single stage press too if that's what you're running.

What does the taper crimp seating die do for my loads?

The taper crimp seater seats the bullet and applies a taper crimp in one step, which helps hold the bullet securely without bulging the neck or buckling the shoulder. It pairs especially well with cannelured bullets and handles slight differences in case length better than a roll crimp. That adds up to more consistent, reliable rounds for your semi-auto.

Additional information

UPC

604544700039

Manufacturer

Manufacturer Part Number

30207

Caliber/Gauge

.22 ARC

Length

5.9500

Product Type

SMALL BASE/TAPER CRIMP

Shipping Weight

1.14

Reviews

There are no reviews yet.

Be the first to review “RCBS 30207 22 ARC Small Base Taper Crimp 2-Die Set (AR Series)”